Removing the Expansion Slot Cover
1.
Use a screwdriver to loosen the screw that secures the slot cover lock to the expansion card or slot cover.
Rotate the slot cover lock counterclockwise.
Screw (Quantity)
M3-0.5*4 NI (1)
2.
Remove the expansion card or slot cover.
Removing the Front I/O Board
1.
See "Removing the Mainboard Tray" on page 32.
2.
Disconnect the 26-pin cable connector from its front I/O board connector (CN1).
Chapter 5
Color
Chrome
5.1 to 6.9 kgf-cm
Torque
86.1A524.4R0
Part No.
41