Table of Contents
Advertisement
English
Preparing Hood
1. (Skip to step 2 if you have 1000 series model.) Remove 7" Round Duct Plate
and 3¼" x 10" Damper from inside of the hood. Set duct plate and damper
aside - with mounting screws.
7" Round Duct Plate
2. Remove tab holding aluminum filter in place.Pull down on filter tab and lift filter out.
Set filter aside.
Filters
3. Remove Wiring Cover from inside the hood. Set cover and mounting screws
aside.
5
3¼" x 10" Damper
tab
Advertisement
Table of Contents
