Lpd Setup Overview - HP 300X - JetDirect Print Server Administrator's Manual
Hp jetdirect print server administrator's guide (300x, 510x)
Hide thumbs
Also See for 300X - JetDirect Print Server:
- Installation and configuration manual (80 pages) ,
- Manuallines (33 pages) ,
- Hardware installation manual (30 pages)
Table of Contents
Advertisement
●
The LAN hardware address (or station address) of the print
server. This address is printed with print server status
information on the HP Jetdirect configuration page and is of the
form:
LAN HW ADDRESS: xxxxxxxxxxxx
where x is a hexadecimal digit (for example, 001083123ABC).
●
An IP address configured on the HP Jetdirect print server.
LPD Setup Overview
The following steps are necessary to configure the HP Jetdirect
print server for LPD printing:
1. Setting up IP parameters.
2. Setting up print queues.
3. Printing a test file.
The following sections provide detailed descriptions for each step.
Step 1. Setting Up IP Parameters
To set up IP parameters on the HP Jetdirect print server, refer to
chapter 3. For more information on TCP/IP networks, refer to
appendix A.
Step 2. Setting Up Print Queues
You must set up a print queue for each printer or printer personality
(PCL or PostScript) you use on your system. Also, different queues
are required for formatted and unformatted files. The queue names
text and raw in the following examples (see rp tag) have special
meanings.
Table 4.2
Supported Queue Names
raw, raw1, raw2, raw3
text, text1, text2, text3
auto, auto1, auto2, auto3
ENWW
no processing
carriage return added
automatic
Configuring for LPD Printing 43
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
