Setting Advanced Storage Properties; Advanced Storage Properties Items - HP AK373A - StorageWorks All-in-One Storage System 1200r 5.4TB SAS Model NAS Server User Manual
Hp storageworks all-in-one storage system user guide (440583-006, june 2008)
Hide thumbs
Also See for AK373A - StorageWorks All-in-One Storage System 1200r 5.4TB SAS Model NAS Server:
- Release notes (21 pages) ,
- Release notes (10 pages) ,
- Release notes (10 pages)
Table of Contents
Advertisement
NOTE:
After storage space is allocated and configured using a wizard, only the following storage configuration
settings can be changed:
•
Allocated space size
•
Percent full warning threshold
•
Enforce Allocated Limit (shared folders and local storage applications)
After a logical disk is created, its configuration cannot be changed.
Setting advanced storage properties
Use the Advanced Storage Properties dialog box in the ASM wizards to change the allocated space
size and default advanced configuration settings for each application component, user-defined
application, and shared folder listed.
After storage is configured using a wizard, you can change the allocated space size using the Allocate
Space Wizard. See
Table 21
provides a brief description of the items you can modify:
Table 21 Advanced Storage Properties items
Physical storage
Item
Size
Physical disk type
RAID level
Increasing or reducing the allocated storage
Description
The amount of storage that ASM allocates to the
application component, user-defined application,
or shared folder you are configuring.
Type of physical disk to add for the hot spare.
Hard drive formatting that provides different
levels of performance, capacity, and data
protection.
for more information.
Notes
You are prevented from setting the
size below 15 MB.
After the allocated storage space is
full (100 percent used), no further
data can be stored to the space
until you increase the size using the
Allocate Space Wizard. The only
exception is for shared folders and
local storage applications without
an enforced allocated limit. If there
is unused storage space on the
logical disk where a component
without an enforced allocated limit
resides, data can be written to the
component until the logical disk is
full.
You are able to choose SAS, (Serial
Attached SCSI) SATA, (Serial
Advanced Technology Attachment)
or SCSI (Small Computer System
Interface) for a physical disk type,
depending on your hardware.*
For more information about RAID
levels, see
levels
HP StorageWorks All-in-One Storage System
Customizing RAID
on page 79.*
77
Advertisement
Table of Contents
Troubleshooting
