Network status
— Select
•
are connecting to is hidden or
WLAN network mode
•
Infrastructure, devices can communicate with each
other and with wired LAN devices through a WLAN
access point. If you select Ad-hoc, devices can send and
receive data directly with each other, and no WLAN
access point is needed.
WLAN security mode
•
security mode that is used in the WLAN access point. If
you select WEP (wired equivalent privacy), 802.1x, or
WPA/WPA2 (Wi-Fi protected access), you must also
configure the relevant additional settings. See the
device help for more information.
WLAN security settings
•
for the selected security mode.
Homepage
— Enter the web address of the page you
•
want to display as the home page when you use this
access point.
To set up a WLAN access point automatically, use the WLAN
wizard. Select
Menu
Connectivity
>
Advanced access point settings
for WLAN
Select
Menu
Tools
>
>
points.
After setting up a basic access point for WLAN, select
Options
Advanced
settings, and define the following
>
advanced settings:
100
Hidden
if the network you
Public
if it is not hidden.
— If you select
— You must select the same
— Edit the security settings
WLAN
wiz..
>
Settings
Connection
>
IPv4 settings
•
addresses for the IPv4 internet protocol.
IPv6 settings
•
for the IPv6 internet protocol.
Ad-hoc channel
•
automatically. To enter the channel number (1-11)
manually, select
Proxy server address
•
Proxy port number
•
number.
Modem
Select
Menu
Together with a compatible computer, you can use your
device as a modem to connect to the web, for example.
Before you can use your device as a modem
• You need an appropriate data communications software
on your computer, such as Nokia PC Suite. For more
information, see the Nokia PC Suite guide.
• You must subscribe to the appropriate network services
from your service provider or internet service provider.
• You must have the appropriate drivers installed on your
computer. You must install drivers for the cable
Access
connection, and you may need to install or update
>
Bluetooth or infrared drivers.
To connect the device to a compatible computer using
infrared, press the scroll key. Make sure the infrared ports of
the device and computer are directly facing each other with
no obstacles between them.
— Enter the device IP and name server
— Select or enter the name server addresses
— The channel is usually chosen
User
defined.
— Enter the proxy server address.
— Enter the proxy server port
Connectivity
> Modem.
>
© 2007 Nokia. All rights reserved.