Table of Contents
Advertisement
3.
Connect your MP series with the host computer using the supplied DirectHD
cable.
Host Computer
DirectHD Port
DirectHD Cable
Do not plug the DirectHD cable in any USB port of the MP series when
the other end is plugged in the DirectHD port.
• When the MP series is properly connected to the host computer, the
DirectHD READY lamp on the MP series turns on green.
• When the MP series is recognized as an external hard disk, a dialog
box may appear. In this case, click Cancel.
Accessing to MP series from Host Computer
Once the MP series is recognized as an external hard disk of the host computer, the
hard disk(s) of the MP series is displayed as XXX(F:) or XXX(G:) in the My
Computer window on the host computer.
• The driver name such as (F:) or (G:) varies depending on the
environment of the host computer.
• If you set a user password to the MP series in the Setup Utility, the MP
series is not recognized as the external hard disk but as removable
disk. In order to access the hard disk of the MP series, cancel the
password. (Refer to the Canceling User Password on the later page.)
DirectHD READY Lamp
6
6-5
Advertisement
Table of Contents
