Table of Contents
Advertisement
Basic
(1)
Network (IPv4) Configures the IPv4 network settings to connect this
(2)
Network (IPv6) Configures the IPv6 network settings to connect this
(3)
IPsec
(4)
UPnP
(5)
DynamicDNS
(6)
Date and Time Sets the date and time, automatic time adjustment and
(7)
Camera
(8)
Audio
Account
(9)
Administrator
(10)
General User
Buffer/Transfer
(11)
Trigger
(12)
Motion
Detection
(13)
Alarm Log
product to the network (see page 37).
product to the network (see page 41).
Enables IPsec (Transport or Tunnel mode) (see page 45).
Enables automatic port forwarding or shortcut to this
product (see page 55).
Registers with the DynamicDNS service (see page 58).
adjust clock for daylight saving time settings (see page 64).
Sets camera name, Vertical Resolution and Picture position
adjustment (see page 67).
Sets output, volume, PC audio input timeout, input,
sensitivity and mute (see page 69).
Sets authentication setting and administrator security (user
*1
name and password) (see page 74).
Sets general user security (user name and password) and
*1
general user's access level (see page 78).
Sets image buffer, transfer by timer, alarm or motion
detection. (See page 82, page 91 or page 102)
Sets the threshold and the sensitivity (see page 118).
Sets the alarm log destination (see page 121).
[For assistance, please call: 1-800-272-7033]
Operating Instructions
35
Advertisement
Table of Contents
