hp digital copier series
handle ink
cartridges
40
4
Remove the new printhead from its packaging and, being careful to
touch only the black plastic, gently remove the plastic tape.
Caution! Do not touch the copper contacts, the printhead
tower, or the ink nozzles.
Ink nozzles
removing the plastic tape from the printhead
5
Match the color on the top of the printhead to the color on the
printhead carriage.
6
Push the new printhead firmly down into the appropriate slot using the
printhead handle. Do not touch the printhead tower, and do not
remove the printhead handle.
7
Move the print carriage latch down, and make sure the loops catch
the hooks. Snap the latch into place, then close the print carriage
access door.
8
After the message appears in the front-panel display, press Enter to
align the printheads.
Before you replace or clean ink cartridges, you should know the part names
and how to handle them.
Printhead tower
Copper contacts
Plastic tape
maintain your hp digital copier