Problem Solving
— Make sure that the Flash PC card is correctly installed in the router. For more
•
Router boots, but the console screen is frozen.
— Check the external console connection and make sure it is secure.
— Verify that the parameters for your terminal are set to the following:
•
Router powers on and boots only when a particular WAN interface card is removed from
the router.
— Replace the card. Consult your reseller or local Cisco sales office for warranty
— If you are using a Cisco 1603 or Cisco 1604, check that the router does not have a
•
Router powers on and boots only when a particular cable is disconnected.
— There might be a problem with the WAN interface card or card cables. Consult your
A-6
Cisco 1600 Series Router Hardware Installation Guide
information on installing the card, refer to the "Installing a Flash PC Card" section
in the "Optional Installations" chapter.
9600 baud
8 data bits
No parity generated or checked
1 stop bit
information.
ISDN S/T or an ISDN U card installed.
reseller or local Cisco sales office for warranty information.