Sends On Fader Window - Yamaha CL1 Owner's Manual
Cl editor owner's manual
Hide thumbs
Also See for CL1:
- Reference manual (277 pages) ,
- Service manual (401 pages) ,
- Owner's manual (67 pages)
Table of Contents
Advertisement
Sends On Fader window
SENDS ON FADER mode enables you to adjust the send level to the MIX/MATRIX bus using the fader. In this mode, the
signals sent from all input channels to a specific MIX/MATRIX bus can be adjusted simultaneously.
Use the SENDS ON FADER button in the Sends On Fader window or Master window to switch this mode on and off.
To display this window, do one of the following:
• Select [Sends On Fader] in the [Windows] menu.
• Click the SENDS ON FADER button in the Master window.
In SENDS ON FADER mode, the color and function of the [ON] button and the fader in the Overview window will
change.
Color of the send destination
[ON] button
Gray
Color of the send destination
Fader
Gray
Click the button (in the Sends On Fader window) for the MIX/MATRIX bus for which you want to adjust the send level.
Then switch the send level off or on, and adjust the send level using the [ON] button and fader for the input channel dis-
played in the Overview window.
For MATRIX bus send, not only the input channels but MIX channels and STEREO/MONO channels can
NOTE
be in SENDS ON FADER mode.
Send is on.
Send is off.
The signal is sent to the bus.
The signal is NOT sent to the bus.
85
CL Editor Owner's Manual
- Quick Links:
- Getting Started
- Mixer Setup
- Scene Memory
- Index
Hide quick links:
Advertisement
Table of Contents
