Pioneer CDJ-400 - Cd/Media Player Driver Installation Manual page 4
Driver installation guide to operate cdj-400(s) through the pioneer djs software
Hide thumbs
Also See for CDJ-400 - Cd/Media Player:
- Operating instructions manual (162 pages) ,
- Service manual (87 pages) ,
- Control manual (10 pages)
Advertisement
<For Windows 2000>
• If the [Digital Signature Not Found] message appears
during installation, click on the [Yes] button to continue the
installation process.
5
When installation is completed, the [Installation is now
complete.] message will appear. Click on the [Finish] button
to complete the process.
[3] Connect CDJ-400 to computer
Using the USB cable, connect the CDJ-400 to your computer,
then set the CDJ-400's power switch to ON.
When the CDJ-400 is first connected to a computer or when
the computer's USB port is reconnected, the message
[Installing device driver software] may appear on the
computer monitor. In this case, simply wait until the message
[Your devices are ready for use] is displayed.
<For Windows XP>
• During the installation process, if the computer displays the
message [Can Windows connect to Windows Update to
search for software?] select [No, not this time], then click
on the [Next] button to continue the installation process.
4
En
• During installation, if the computer displays the message [What
do you want the wizard to do?] select [Install the software
automatically (Recommended)], then click the [Next] button
to continue installation.
• If the [Hardware Installation] message appears during
installation, click on [Continue Anyway] to continue the
installation process.
<For Windows 2000>
• If the [Digital Signature Not Found] message appears during
installation, click on the [Yes] button to continue the installation
process.
Advertisement
