Table of Contents
Advertisement
Available languages
Available languages
Bosch C70 charger I Operating instructions
ternately. The charger will attempt to detect the battery voltage using an elaborate mea-
surement process. After 1-3 minutes, the charger will detect whether the battery is 12 V
or 24 V and switch to the corresponding 12 V motorcycle/car mode or 24 V truck mode.
4.6
Override mode
If the charger detects a connected battery as a 12 V battery and switches to 12 V
mode, but the user is very sure that the battery type is 24 V, the user can press and
hold the mode button for 5 seconds to switch the charger to any 24 V charging mode.
I
CAUTION
The 24 V mode can charge the battery from a voltage as low as 5.5 V. As a result, a 12
V battery could be overcharged and cause further hazards (increased gassing, explo-
sion, fire...) to humans and animals.
4.7
Device protection function
In the event of a short circuit on the charging cable, the fuse (4a) on the charging ca-
ble prevents damage to the device and the electrical system.
5 Maintenance and care
Always remove the mains plug from the socket before cleaning the charger. The
charger is maintenance-free.
1. Switch off the device.
2. Use a dry cloth to clean the plastic surfaces of the device.
3. Never use solvents or other aggressive cleaning agents.
4. To maintain operational safety, the devices must only be repaired by the manufactur-
er or its service representative using original spare parts.
5. For Li-Ion (LiFePO₄) batteries, please use the Bosch C40-Li or C80-Li.
6. For 6 V batteries, please use the C30, C40-Li or C80-Li.
For the EU version:
Robert Bosch GmbH
Auf der Breit 4
76227 Karlsruhe, Germany
Phone: +49 (0)391 832 29671
Email:
kundenberatung.kfztechnik@de.bosch.com
For the UK version:
Robert Bosch GmbH
Broadwater Park,
Uxbridge UB9 5HJ
Phone: 0344 892 0115
Email: contact@uk.bosch.com
18
EN
Advertisement
Table of Contents
