▶ Do not modify the appliance or flue system in any way. HIf you smell gas Bosch accepts no liability arising from any such actions. This does not A gas leak could potentially cause an explosion. If you smell gas, observe affect your statutory rights.
Servicing risks are avoided.” H Please read these instructions carefully ▶ These instructions are applicable to the Bosch appliance model/s Ensure that the service engineer completes the Service Record in the stated on the front cover only. Benchmark Checklist after each service.
– If the system pressure is gravity fed and cannot be increased via a filling link, then the appliance can be converted to allow If you would like to know more about servicing options from Bosch, connection to a semi-sealed heating system please visit www.worcester-bosch.ie...
Prepare for operation ▶ Check the system pressure on the display. Topping up the system pressure – Indicator in red zone: pressure is too low or too high. Sealed heating system – Indicator in yellow zone: pressure is low or slightly too high. To aid in filling the system.
Operation ▶ Remove the hose [2] and replace the blanking cap [1]. Control panel overview Fault - 1017 System pressure ok. System pressure Stop refilling too low 0010031533-001 Pressure OK: 1.5 bar Pressure: 0.6 bar 0010033763-001 Fig. 6 Overview Fig. 5 External filling loop Burner display: Illuminates when the burner is alight.
Operation Symbols on the display Adjusting the appliance flow temperature 4.4.1 Setting the flow temperature Symbol Explanation Connection with the Wi-Fi network (only available with accessories) With underfloor heating systems observe the maximum permissible flow Connection with Radio Frequency (RF) transmitter, e.g. temperature.
Key (control accessories) Setting the heating control device Menu item Function definition DHW time prog. Timer for hot water: Weekday(s) selection, day program and timer adjustment ( 5.1 "Setting the time program", Observe the operating instructions of the heating controller. This shows page 10).
Shutdown Description of the LED displays Example Clearances and ventilation information Constant yellow: Appliance clearances No fault, time and date not available: Your installer will have provided adequate space around the appliance ▶ Set the time and date on the appliance. for operation, safety and servicing/maintenance access.
Page 11
Clearances and ventilation information Reduced front maintenance minimum clearances The front servicing clearance for this appliance can be reduced to 450mm. For installations with a front servicing clearance less than 600mm (minimum of 450mm), the following additional criteria must be achieved.
Maintenance • There must be provision for means of preventing accidentally Maintenance stepping into the loft hatch. – Safety guard, handrail or safety chain to prevent accidentally HInspection, cleaning and maintenance stepping into the loft hatch. The user is responsible for ensuring the heating system is safe and environmentally compatible.
This could be the open end of the pipe, at a bend or elbow, or where there is a In the event of an appliance fault or breakdown please contact Bosch sag in the pipe in which condensate can collect.
Malfunction or failure 10.4 System gassing troubleshooting CAUTION WARNING If the pressure in your heating system is repeatedly rising (this can be checked via the boilers pressure gauge or digital display and Caution must be exercised when venting radiators or adjusting should be checked when the system is cold), and especially if you system pressure after commissioning of your boiler.
Tips on energy saving Environmental protection is a fundamental corporate strategy of the Heating economically Bosch Group. The appliance provides a high level of comfort whilst keeping fuel The quality of our products, their economy and environmental safety are consumption and the environment effects as low as possible.
• During the period of this guarantee any components of the appliance that are proven to be faulty or defective in manufacture will be exchanged or repaired free of charge by Bosch Thermotechnology Ltd. • The householder may be asked to prove the date of installation, that the appliance was correctly commissioned and, where appropriate, serviced to the satisfaction of Bosch Thermotechnology Ltd.
Energy consumption Energy consumption 14.1 Product data on energy consumption Natural Gas appliance The following product data comply with the requirements of the EU Regulations No. 811/2013, No. 812/2013, No. 813/2013 and No. 814/2013 supplementing the Regulation (EU) 2017/1369. Product data Symbol Unit 7 733 601 635...
Page 18
Energy consumption LPG appliances The following product data comply with the requirements of the EU Regulations No. 811/2013, No. 812/2013, No. 813/2013 and No. 814/2013 supplementing the Regulation (EU) 2017/1369. Product data Symbol Unit 7 733 601 639 7 733 601 638 7 733 601 637 7 733 601 636 Product type...
You can contact our Data Protection Officer under: Data Protection Officer, Information Security and Privacy (C/ISP), Robert Bosch GmbH, Postfach 30 02 20, 70442 Stuttgart, GERMANY. You have the right to object, on grounds relating to your particular...