Table of Contents
Advertisement
Available languages
Available languages
Slide and hold the Volume jog switch in the volume down (-) direction for 1 second to check the
Indicator lamp and battery level by voice.
Battery Status
Indicator Lamp
Blue flashes three times
HBS-1100 Pairing and Connecting
If you start the process after putting in your earbuds, you can easily pair and
connect following the voice prompts.
NOTE: If you are prompted for the authorization code (PIN Code), type 0000.
If you hear that the battery is insufficient, recharge the battery before
proceeding with pairing.
If pairing is not completed within 3 minutes, the power automatically turns off.
When the power automatically turns off, slide the Power switch from the
OFF to the ON position to turn the power on.
Connecting Quickly
OFF
ON
1 Slide the Power switch towards the ON position to turn on the power.
2 The blue Indicator lamp turns on and the HBS-1100 switches to Search mode.
3 From the mobile phone or device list, select LG HBS1100 to connect.
4 A voice message will indicate that the connection is completed.
5 Use the same process to pair the HBS-1100 with other devices.
4
Sufficient
Purple flashes three times
OFF
ON
Normal
Insufficient
Red flashes three times
Advertisement
Chapters
Table of Contents
