JUPITER-(3000K, 6000K, 9000K)-H1 Smart
Transformer Station
User Manual
5.5 Upgrading the STS
Step 1 Choose Maintenance > Software Upgrade, upload the STS upgrade package,
select the target device, and upgrade the STS.
Figure 5-7 Software upgrade
Step 2 After the software is upgraded, the STS automatically restarts. Check the software
in 3 minutes.
----End
5.6 Setting STS Parameters
Adding Reserved Signals
Step 1 Choose Monitoring > STS > User-Defined Parameters, and select the target
reserved signal based on the signal address.
Step 2 Set parameters.
Parameter
Signal Name
Issue 02 (2023-09-30)
NO TE
You are advised to upgrade the STS to the latest version. Obtain the STS upgrade package
from the Company.
NO TE
● Some STS signals are not displayed on the SmartLogger WebUI by default. They will be
displayed after you select them by referring to this section.
● The WebUI screenshots are for reference only.
Description
Enter a user-defined signal name.
Copyright © Huawei Technologies Co., Ltd.
5 Human-Machine Interaction
91