Contents Help and support FAQs Contact Philips Notice Compliance Mains fuse Important Safety Care for your product Care of the environment Your SoundBar Main unit Remote control Connect your SoundBar Subwoofer Connectors Connect audio from TV and other devices Use your SoundBar...
SoundBar, or void your warranty. Contact Philips If you contact Philips, you will be asked for the model and serial number of your product. The model number and serial number are on the back or bottom of your product. Note the numbers before you call Philips: Model No.
Secure the wall mount to a wall that can support the combined weight of the product and the wall mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage.
Your SoundBar Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www. philips.com/welcome. Main unit (Standby indicator) When the SoundBar is on standby, the standby indicator is red.
Remote control (Standby-On) • Switch the SoundBar on or to standby. • When the SoundBar is on standby, the standby indicator is red. Source buttons • AUX: Switch your audio source to the AUX connection. • OPTICAL: Switch your audio source to the optical connection.
TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick start guide. For a comprehensive interactive guide, see www.connectivityguide.philips.com. Note • For identification and supply ratings, refer to the type plate at the back or bottom of the product.
Connect Connect your subwoofer to your SoundBar as described in the quick start guide. Connectors Connect other devices to your SoundBar. Side right MUSIC iLINK Audio input from an MP3 player. Rear left (WHITE) (RED) AUDIO IN DIGITAL IN SUBWOOFER (8Ω) SUBWOOFER Connect to the supplied subwoofer.
Option 2: Connect audio through a digital coaxial cable Good quality audio Using a coaxial cable, connect the COAXIAL connector on your SoundBar to the COAXIAL/ DIGITAL OUT connector on the device. The digital coaxial connector might be labeled DIGITAL AUDIO OUT. Option 3: Connect audio through analog audio cables Basic quality audio...
Choose your sound This section helps you choose the ideal sound for your video or music. Change treble or bass Change the high frequency (treble) or low frequency (bass) settings of the SoundBar to suit your video or music. Press TREBLE +/- or BASS +/- to increase or decrease treble or bass.
Wall mount Before you mount your SoundBar to the wall, read all safety precautions (see ‘Safety’ on page 5). If you have any query, contact Philips Consumer Care in your country. Screw length/diameter Depend on the type of wall mounting this SoundBar, make sure that you use screws of a suitable length and diameter.
If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome. Main unit Standby indicator on the front panel blinks continuously.