Table of Contents
Advertisement
a When the appliance is switched on, the display
shows the settings for the current operation. The
timer is displayed in the status display.
a Once the timer has elapsed, a signal sounds. A no-
tification appears on the display confirming that the
timer has finished.
Changing the timer
You can change the timer at any time.
If the timer is running in the background, use
1.
select the timer beforehand.
Ventilation function "Crisp Finish"
11 Ventilation function "Crisp Finish"
The ventilation function "Crisp Finish"
ture from the cooking compartment so that your food
will be more crispy.
Hot steam that may escape when the appliance door is
opened is reduced.
11.1 Suitable types of heating with the
ventilation function
Only certain types of heating are suitable for the ventil-
ation function.
You can use the ventilation function for the following
types of heating:
¡ 4D hot air
¡ Top/bottom heating
¡ Circulated air grilling
¡ Pizza setting
11.2 Setting the ventilation function
You can activate the ventilation function at any time,
even after the start of the operation.
Meat probe
12 Meat probe
Cook with precision by inserting the meat probe
the food and setting a core temperature on the appli-
ance. The meat probe measures the core temperature
inside the food. Once the set core temperature has
been reached in the food, the appliance automatically
stops heating.
12.1 Suitable types of heating with the meat
probe
Only certain types of heating are suitable for use with
the meat probe.
You can use the meat probe with the following types of
heating:
¡ 4D hot air
¡ Top/bottom heating
¡ Hot air gentle
¡ Top/bottom heating gentle
¡ Circulated air grilling
¡ Pizza setting
¡ Low-temperature cooking
¡ Bottom heat
¡ Keeping warm
2.
3.
4.
Cancelling the timer
You can cancel the timer at any time.
1.
2.
3.
to
extracts mois-
1.
2.
a The
3.
a The appliance starts heating.
a The setting values are shown on the display.
4.
Note: Amplified fan noises can be heard while the ap-
pliance is in operation.
Cancelling the ventilation function
You can switch off the ventilation function at any time.
1.
2.
a The
a The operation continues without the ventilation func-
into
12.2 Inserting the meat probe
Use the meat probe supplied or order a suitable meat
probe from our customer service.
Using the wrong meat probe could damage the insula-
tion.
▶
ATTENTION!
Otherwise the meat probe may be damaged.
▶
▶
The meat probe is sharp.
▶
1.
Ventilation function "Crisp Finish" en
Press .
Change the timer using the setting ring.
Press
to confirm.
If the timer is running in the background, use
select the timer beforehand.
Press .
Reset the timer using
Set a suitable type of heating and a temperature.
If required, you can select other settings and com-
bine with the ventilation function.
Press
"Crisp Finish".
symbol lights up red.
Press
to start the operation.
When the food is ready, use
ance off.
Press
on the display.
Press
"Crisp Finish".
symbol changes back to white.
tion.
WARNING ‒ Risk of electric shock!
Only use the meat probe for this specific appliance.
Do not trap the cable of the meat probe.
To prevent the meat probe from being damaged by
excessive heat, there must be a gap of a few centi-
metres between the grill element and the meat
probe. The meat may expand during the cooking
process.
WARNING ‒ Risk of injury!
Handle the meat probe with care.
Insert the meat probe into the food.
.Reset the timer using .
to switch the appli-
to
15
Advertisement
Table of Contents
