Table of Contents
Advertisement
Use the control ring to set the cooking time.
4.
Press to start.
5.
a The microwave starts and the cooking time counts
down. The heating line does not appear.
a When the time has elapsed, a signal sounds. The
time shown in the display is zero.
When the cooking time has elapsed:
6.
To stop the signal early, press any touch field.
‒
If necessary, set a microwave power setting and
‒
a cooking time again.
When the food is ready, press
‒
appliance off.
If you have switched off the drying function for the
7.
microwave in the basic settings, dry the cooking
compartment.
→ "Drying", Page 21
Note: If you open the appliance door during operation,
the operation stops. When you close the appliance
door, you have to press to continue. If you have
changed the basic setting, make sure that the mi-
crowave does not resume operation without food in-
side.
→ "Basic settings", Page 19
Changing the microwave power setting
If you change the microwave power setting, the cook-
ing time is reset.
Press to pause operation.
1.
a The microwave power setting is highlighted in white.
Use the control ring to change the microwave power
2.
setting.
Press to continue operation.
3.
Changing the cooking time
After the start of the microwave operation, you can
change the cooking time directly.
Use the control ring to change the cooking time.
▶
a The change is applied immediately.
11.3 MicroCombi
To reduce the cooking time, you can use some types
of heating in combination with microwave mode.
Possible combinations include:
¡ 90 watts + 4D hot air
¡ 90 watts + Hot air grill
¡ 180 watts + Hot air grill
¡ 360 watts + Hot air grill
Setting MicroCombi
Note:
Note the correct way to handle the microwave:
¡ → "Safety", Page 2
¡ → "Preventing material damage", Page 6
¡ → "Microwave power settings", Page 11
¡ → "Cookware and accessories with microwave",
1.
a The combination is highlighted in white.
to switch the
2.
3.
a The temperature is highlighted in white.
4.
5.
a The cooking time is highlighted in white.
6.
7.
a The appliance starts to heat and the cooking time
a When the time has elapsed, a signal sounds. The
8.
Changing the temperature
Once the MicroCombi operation has started, you can
change the temperature directly.
▶
a The change is applied immediately.
Changing the cooking time
After the start of the MicroCombi operation, you can
change the cooking time at any time.
1.
2.
a The change is applied immediately.
Changing the combination
If you change the combination of the type of heating
and the microwave power setting, all of the other set-
tings are reset.
1.
a The combination is highlighted in white.
2.
3.
Page 15
Press
.
Turn the control ring to set the required combina-
tion.
Press
.
Use the control ring to set the temperature.
Press
.
Use the control ring to set the cooking time.
Press to start.
counts down.
time shown in the display is zero.
When the cooking time has elapsed:
To stop the signal early, press any touch field.
‒
If necessary, set a combination again.
‒
When the food is ready, press
‒
appliance off.
Use the control ring to change the temperature.
Press
.
Use the control ring to change the cooking time.
Press to pause operation.
Use the control ring to change the combination.
Press to continue operation.
Microwave en
to switch the
17
Advertisement
Table of Contents
