Table of Contents
Advertisement
NOTE: In model 5KES8556A, 4 user profiles are available, but you cannot create a
personalised username. In model 5KES8557A, 4 user profiles are available, and you can
create a personalised username. In model 5KES8558A, 6 user profiles are available, and you
can create a personalised username.
CARE AND CLEANING
For best results, regularly clean the Fully Automatic Espresso Machine and accessories.
IMPORTANT: Allow the appliance to cool completely before putting on or taking off parts, and
before cleaning the appliance.
NOTE: Do not use abrasive cleansers or scouring pads when cleaning the Fully Automatic
Espresso Machine, parts, or accessories. Do not immerse the Fully Automatic Espresso
Machine or cord in water or other liquids. None of the removable parts such as Drip Tray,
Bean Hopper, Lid, Water Tank, Brew Unit, Service Door, Dispenser, and milk container lid are
dishwasher-safe and should be washed by hand and thoroughly rinsed.
NOTE: All cleaning and maintenance programs can be selected and started in the
Maintenance menu. If a message, instruction for cleaning or maintenance activity appears on
the Display, the program can be started directly through the message/instructions.
CLEANING THE FULLY AUTOMATIC ESPRESSO MACHINE
All cleaning and maintenance programs can be selected and started in the Cleaning Menu " ".
If a message for a cleaning or maintenance activity appears on the Display, this program can
also be started directly through the message.
1.
Select and confirm the message or select the " " menu. Select the desired cleaning or
maintenance program and start.
2.
The machine starts the corresponding cleaning or maintenance process and displays
instructions for additional actions. Follow the instructions in the Display up to the end of the
program.
RINSING THE FROTHER: EASY MILK RINSING
After you make milk based drinks, the Display instructs you to rinse the frother. This should be
done as soon as possible, but at the latest before switching off the machine.
1.
Select and confirm the instruction or in the " " menu, select the menu option
"Easy Milk Rinsing".
2.
Connect the supplied Milk Hose with one end to the dispenser outlet and put the other end
in the Drip Tray, and confirm on the Display.
3.
Place a sufficiently large container (≥ 0.5 L) under the dispenser outlet and confirm on the
Display.
4.
The machine starts the rinsing process. As soon as the rinse cycle is ended, the machine
heats up and is then ready for operation again.
NOTE: Rinsing the milk frother after each use is important to avoid milk build up.
CLEAN FROTHER: DEEP MILK CLEANING
1.
Select and confirm the message on the Display or in the " " menu, select the menu option
"Deep Milk Clean".
2.
Add milk cleaning system specific detergent and water in a container (at least 0.3 L).
Please observe the instructions of the detergent manufacturer for the mix ratio.
3.
Follow the instructions on the Display up to the end of the program and confirm each time.
The machine then heats up and is ready for operation again.
8
Advertisement
Table of Contents
