Table of Contents
Advertisement
PRE-WASH
3
SELECTION BUTTON
DELAY SELECTION
4
BUTTON
TEMPERATURE
5
SELECTION BUTTON
RINSE SELECTION
6
BUTTON
SPIN SELECTION
7
BUTTON
DRYING MODE
8
BUTTON
WD0704RQ-02921B_EN.indd 23
Single Wash - It's used to wash clothes not heavily stained.
Single Rinse - Use for a load that needs rinsing only or to add
rinseadded fabric softener to a load.
Single Spin - Performs an additional spin cycle to remove more water.
Drain - Just drain the water from washing machine without spinning.
Drum Clean - To keep the drum clean, a sanitization is needed at least
every one to three months.
•
The default wash temperature is 60 ˚C.
•
The default spin speed is the maximum speed.
Drum Clean Tips:
The drum must be keep clean all the time. After long time using, many
kinds of bacteria from water and air would adhere to the drum in the form
of besmirch, which does harm to your family's health. So please use the
Drum Clean function once every one to three months, to keep the drum
always under a clean and healthful condition for using.
Press this button to select pre-wash.
Press this button repeatedly to cycle through the available Delay End
options (from 3 hours to 19 hours in one hour increments).
The hour displayed indicates the time when the wash cycle will be finished.
Press this button repeatedly to cycle through the available water
temperature options: (Cold Water , 30 ˚C, 40 ˚C , 60 ˚C and 95 ˚C).
Press this button to add additional rinse cycles. The maximum number
of rinse cycles is five.
Press the button repeatedly to cycle through the available speeds for the
spin cycle.
WD0704
WD0702
"No spin
" - The laundry remains in the drum and no spin cycle is
performed after the final drain.
"Rinse Hold
" -The laundry remains soaking in the final rinse water. Before
the laundry can be unloaded, either a Drain or Spin cycle must be performed.
Pressing the button cycles through the following options.
Cup Board
→ Iron
→ Time Dry
→ 2:00min. → 2:30min. → 3:00min.) → Cup Board
"Cup Board
" - Use this cycle to dry loads such as cotton, underwear,
and linen.
"Iron
" - Finishes the dry cycle in a moist state appropriate for Ironing.
"Time Dry
" -Dry the laundry for the specified period of time.
• You must avoid washing laundry that may not be dried as it may
be deformed even at low temperatures.
• The Cup Board, Iron and Time Dry options detect the weight of
the laundry in order to display an accurate drying time and dry
them more completely.
• The drying conditions may differ depending on the type and the
amount of laundry.
,
, 400, 800, 1200, 1400 rpm
,
, 400, 800, 1000, 1200 rpm
(30min. →1:00min. → 1:30min.
washing a load of laundry _23
2010-7-8 16:43:16
Advertisement
Table of Contents
