Table of contents Table of contents Explanation of symbols and safety instructions 1 Explanation of symbols and safety instructions ..2 Explanation of symbols 1.1 Explanation of symbols ..... . .2 1.2 General safety instructions .
These operating instructions are intended for the operator of Product description the product. The RT 800 is a remote control for the control of heating systems using control panel UI 800. All instructions must be observed. Non-observance can result in serious personal injury with potentially fatal consequences as well as damage to property and the environment.
Idle state and select with the OK key. After 5 minutes without being operated, the RT 800 switches ▶ Mark the desired heating mode with the / and . keys and the display to idle state. The brightness is reduced and a select with OK.
Operation and setting of the most important functions ▶ Press the OK key. The display shows: To delete the switching time. ▶ Use / key to navigate to Delete switch point. Time program ▶ Delete the switching point with OK and confirm the safety query with OK.
Operation and setting of the most important functions 3.3.2 Set operation mode for DHW heating ▶ Enter the date and time the holiday ends and confirm each with OK. The operating mode can be changed between economical The holiday function starts automatically at the time mode and comfort mode, or switched off completely.
Menus Menu “Overview” Menu “Overview” Menu item Description Overview Information If necessary, indicates faults. Tuesday, 10.08.21 Different values for operating the heat pump 14:50 can be called up under HP Info. Display If the indication in the display is difficult to see settings due to the lighting conditions, adapt the 20°...
Menus Menu item Description Menu item Description Time Depending on the heating system, 2 – 6 Operation Depending on the system configuration, program switching times can be set for each day. The Mode various operating modes can be set. minimum duration of a heating phase is 15 •...
Description Environmental protection is a fundamental corporate strategy Solar status Indicates the solar flow temperature and the of the Bosch Group. status of the solar pumps. The quality of our products, their economy and environmental safety are all of equal importance to us and all environmental...
Menu overview Menu overview Heating The menu items are displayed in the sequence listed below. – Start Boost/Stop Boost Depending on the system configuration, all menus are not – Boost runtime shown. – Boost temperature – Heating Mode Overview – Off / Manual / Auto –...
Page 11
Menu overview 2nd heating circuit Pool – Start Boost/Stop Boost – Operation Mode – Heating Mode – Off / On – Off / Manual (Heating with constant temperature) / – Allow aux. heat. pool Auto (Heating controlled by time program) –...