Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS &
CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO
MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR
FUTURE USE.
1.
INTRODUCTION
Baseball bump cap with solid internal cover for protection against knocks and grazes. Adjustable strap suits all sizes. Convenient short
peak design, better suited for working in and around vehicles. Internal padding and ventilation for added comfort. Conforms to EN 812.
Notified Body: 2797
Type Examination Certificate number: CE 691484
Carried out by: BSI Group Netherlands B.V., John M. Keynesplein 9, 1066 EP Amsterdam, The Netherlands
2.
SAFETY
WARNING! THIS IS NOT AN INDUSTRIAL SAFETY HELMET
‰
This bump cap does not provide protection against the effects of falling or thrown objects, or moving suspended loads. It should not be
8
used instead of an industrial safety helmet as specified in EN 397.
This bump cap is made to absorb the energy of a blow by partial destruction or damage to the shell and the harness, if fitted, and even
9
though such damage may not be readily apparent, any bump cap subjected to severe impact should be replaced.
For adequate protection this bump cap must fit or be adjusted to the size of the user's head. Adjust the strap to ensure the cap fits correctly.
9
The attention of users is also drawn to the danger of modifying or removing any of the original component parts of the bump cap, other
9
than as recommended by the bump cap manufacturer.
This cap is designed for minimal risk only against rigid, immobile surfaces that could result in lacerations or superficial injuries.
9
A risk assessment of the task and area should be performed before using this product.
9
Clean the product as per these instructions to avoid damage to the product and/or user.
9
When not in use, store the product in a well-ventilated area away from extremes of temperature.
9
Bump caps should not be adapted for the purpose of fitting attachments in any way not recommended by the bump cap manufacturer.
8
DO NOT apply paint, solvents, adhesives or self-adhesive labels, except in accordance with instructions from the bump cap manufacturer.
8
DO NOT use this product for anything other than what it is intended.
8
DO NOT use to protect against falling or thrown objects, or moving/suspended loads.
8
DO NOT use the product if damaged, deteriorated or contaminated. If damaged, replace.
8
3.
MAINTENANCE
3.1.
CLEANING
Use lukewarm water and a mild soap solution to wipe clean.
9
Leave the product to dry at room temperature.
9
DO NOT use caustic solutions, acids, solvents or strong mechanical cleaning.
8
3.2.
STORAGE
Store in a clean, dry environment. Use a clean poly-bag to transport.
9
DO NOT carry loose with sharp tools or items that may damage the product.
9
DO NOT place in direct sunlight or keep in contact with solvents.
8
3.3.
OBSOLESCENCE
Inspect the cap before each use.
9
It is recommended to replace every 2-3 years as necessary.
9
This product should be replaced sooner if damaged.
9
© Jack Sealey Limited
SAFETY BASEBALL BUMP CAP
SSP16.V2
MODEL NO:
Original Language Version
SSP16.V2
Issue 1 20/11/23
Advertisement
Related Manuals for Sealey SSP16.V2
Summary of Contents for Sealey SSP16.V2
- Page 1 SSP16.V2 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS &...
- Page 2 Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. EU | Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68 Ireland UK | Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 sales@sealey.co.uk...