Summary of Contents for Panasonic ERZVF M220 Series
Page 1
●Protection of consumer, industrial equipment ●Absorption of switching surge from relays ■ As for handling precautions and minimum quantity / Packing unit please see related information. Applicable Standards ●CQC(GB/T10193,GB/T10194) Registered in "Panasonic Part No." Explanation of part numbers E R Z...
SMD type / VF series Ratings and characteristics ●Operating temperature range : -40 to 85 ℃ ●Storage temperature range : ‒40 to 125℃ Maximum Varistor Clamping Maximum Maximum Rated peak current voltage voltage at Ip energy allowable voltage power (8/20μs, at 1 mA...
SMD type / VF series Typical characteristics Voltage vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZVF1(2)M220 to ERZVF1(2)M680 ERZVF1(2)M220 to ERZVF1(2)M680 Max.Leakage 2 times:5 min. interval Max.Clamping Voltage Current up to 10 times:2 min. interval up to 10 times : 10 sec.
Page 4
SMD type / VF series Marking contents ZNR Surge Absorbers ①Product Name ① Z N R ② Series VF□M VF Series V F M □□ The first two digits are signifi cant figures and the third one denotes ③ Abbreviation of Part No.
SMD type / VF series Performance characteristics Characteristics Test methods Specifications Electrical measurements (initial/after tests) shall be conducted at temperature of 5 to ― Standard test condition 35 ℃, relative humidity of maximum 85 %. The voltage betwen two terminals with the specified measuring current 1 mA DC applied is called V or V .
Page 6
■ The technical information contained in this catalog is intended to show only typical operation and application circuit examples of this product. This catalog does not guarantee that such information does not infringe upon the intellectual property rights of Panasonic or any third party, nor imply that the license of such rights has been granted.
Matters to Be Observed When Using This Product Matters to Be Observed When Using This Product (D-type : V series / SMD-type : HF・VF series) Safety measures An abnormal state for varistors (ZNR surge absorbers) of the D type/V series and SMD-Type/HF, VF Series (hereinafter the product or "the surge absorber") that results from a problem with service conditions (materials used, the surrounding environment, power conditions, circuit conditions, etc.) may cause a fire accident, electric shock accident, burn accident, or product failure.
Page 8
Matters to Be Observed When Using This Product Use environments and cleaning conditions ■ Do not use the surge absorber in an outdoor environment where the surge absorber is exposed to sunlight. ■ Do not use the surge absorber in which direct sunlight hits the surge absorber or near a heating element where the temperature of the surge absorber would rise above its working temperature.
Page 9
Matters to Be Observed When Using This Product ■ Current fuse (1) Select a surge absorber and the rated current for a current fuse to be used in a manner shown in the following table. Confirm that no secondary accident arises when the surge absorber in an actual circuit breaks. Selected rated currents of current fuses shown in the following table are exemplary one and may vary depending on circuit conditions used.
Page 10
Matters to Be Observed When Using This Product Table 1 Application example of the product (ordinary application example) Surge absorber placed between lines Surge absorber placed between a line and the ground Single-phase AC Single-phase AC Current fuse ZNR1 Current fuse ZNR1 Protected device...
Page 11
Matters to Be Observed When Using This Product Mounting and storage conditions ■ When soldering the surge absorber, follow recommended soldering conditions shown in the following table so that solder or the insulation material making up the surge absorber is not melted. ■...