Table of Contents
Advertisement
Microwave
en
Setting the microwave combined with a type
of heating
Not all types of heating are suitable for combining with
the microwave.
You can set output settings from 90 W to 360 W.
Suitable types of heating:
4D hot air
:
Top/bottom heating
%
Hot air grilling
4
Grill, large area
(
Grill, small area
*
Press the menu button.
1.
The operating modes menu opens.
Select the "Microwave combination" field.
2.
A type of heating, temperature, microwave output
setting and cooking time are suggested.
Touch the appropriate field and use the rotary
3.
selector to set the required values.
Press the Start/Stop button to start.
4.
The cooking time starts counting down.
You can change the values at any time. To do so, touch
the appropriate field and use the rotary selector to
change the values.
The cooking time has elapsed
A signal sounds. The microwave operation has finished.
0 min 00 s appears in the display end "Finished"
x
appears in the status bar. You can cancel the audible
signal before it has finished by pressing the
If you want to set a microwave output setting again,
touch the appropriate field and enter a cooking time.
The operation starts again.
Pausing the operation
Press the start/stop button: The oven is paused. Press
the start/stop button again; the operation continues.
Open the appliance door: The operation is interrupted.
After closing the door: The operation continues.
Cancelling the operation
Press the On/Off button.
Setting the microwave
To achieve optimum results with the microwave, always
insert the wire rack at shelf position 1.
Press the Menu button.
1.
The Operating Modes menu opens.
Select the "Microwave" field.
2.
A microwave output setting and cooking time are
suggested.
Use the rotary selector to set the microwave output
3.
setting and/or cooking time.
Start the microwave using the Start/Stop button.
4.
The cooking time starts counting down.
20
You can change the values at any time. To do so, touch
the appropriate field and use the rotary selector to
change the values.
To prevent condensation from forming when the
appliance is in microwave only mode, the appliance will
automatically switch on an additional heating element
when it is set to 600 W or "Max.". The cooking
compartment and the accessories will become hot. The
cooking result is not affected by this.
Note:
settings. ~ "Basic settings" on page 18
:
Warning – Risk of burns!
At the highest settings in microwave only mode, the
drying function will automatically switch on an additional
heating element to heat the cooking compartment.
Never touch the inside surfaces of the cooking
compartment or the heating elements while they are
hot. Keep children at a safe distance.
The cooking time has elapsed
A signal sounds. The microwave operation has finished.
0 min 00 s appears in the display end "Finished"
x
appears in the status bar. You can cancel the audible
signal before it has finished by pressing the
If you want to set a microwave output setting again,
touch the appropriate field and enter a cooking time.
The operation starts again.
Pausing the operation
Press the start/stop button: The oven is paused. Press
the start/stop button again; the operation continues.
Open the appliance door: The operation is interrupted.
button.
0
After closing the door, press the start/stop button. The
operation continues.
Note:
that the microwave does not resume operation without
food inside. ~ Page 18
:
Warning – Risk of burns!
The accessible parts become very hot when in
operation. Never touch hot parts. Keep children at a
safe distance.
Cancelling the operation
Press the On/Off button.
Dry
With the "Dry" operating mode, the cooking
compartment is heated up and the moisture in the
cooking compartment evaporates. Use the drying
function after every microwave operation.
Press the menu button.
1.
The operating modes menu opens.
Select the "Dry" operating mode.
2.
Press the Start/Stop button to start.
3.
The drying function starts and ends automatically
after 10 minutes.
Open the appliance door for 1 to 2 minutes so that the
moisture can escape.
You can switch this function off in the basic
If you have altered the basic setting, make sure
button.
0
Advertisement
Table of Contents
