Table of Contents
Advertisement
Available languages
Available languages
The first time the vacuum cleaner is
switched on, the highest setting will be
selected automatically.
After that the vacuum cleaner will
switch on at the setting which was used
previously.
Press the + button to select a higher
suction power level.
Press the - button to select a lower
suction power level.
Radio controlled handle with Boost
function
Some models also feature a Boost
power function. This function uses in‐
creased power for a short period for
vacuuming both fine and coarse stub‐
born soiling.
Press the + control until the maxi‐
mum power level has been reached.
Then press the + control again.
This activates the Boost function for 20
seconds. The Boost indicator on the
vacuum cleaner will light up yellow
You now have the following options:
Press the - control before the 20 se‐
conds have elapsed
This switches the Boost function off
and activates maximum power.
Press the + control again once the 20
seconds have elapsed
This activates the Boost function for
another 20 seconds. It can be activated
three times in a row. After that a pause
of one minute is required before reacti‐
vating it.
To open the air inlet valve
(dia. 25 + 26)
(not on models with radio-controls on
the handle)
It is easy to reduce the suction power
for a short time, e.g. to prevent rugs or
other objects being sucked into the
vacuum cleaner.
Open the air inlet valve on the handle
far enough to reduce the suction
power.
The floorhead will be easier to manoeu‐
vre.
During vacuuming
When vacuuming, pull the cleaner
behind you on its wheels. You can
stand it upright for vacuuming stairs
and curtains etc.
When vacuuming fine dust, e.g.
sawdust, sand, plaster, flour, talcum
powder etc., electrostatic charges
build up naturally. Under certain con‐
ditions these charges will be re‐
leased. To avoid the unpleasant ef‐
fects of these discharges, a metal in‐
lay has been incorporated into the
underside of the handle. Please
make sure that you keep your hand
in constant contact with this metal
strip during vacuuming (dia. 27 + 28).
Interrupting operation (dia. 24)
(for models with radio controls on the
handle)
The vacuum cleaner can be paused for
short breaks whilst vacuuming.
Press the Standby button on the
handle.
en
43
Advertisement
Chapters
Table of Contents
