Table of Contents
Advertisement
Basic setting
Installation
protection
Programme
counter
1
Example
15.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press Iron Dry and, at the same
2.
time, turn the programme selector
to position 2.
The display shows the current
a
value.
Set the programme selector to the
3.
required position.
→ "Overview of the basic settings",
Page 36
To change the value, press Ready
4.
In .
Programme
position
4
5
Value
Description
LO (10 A)
Set the value for the minimum in-
HI (13 A)
stallation protection of the appli-
ance.
Note: The values for the energy
label were determined with a min-
imum installation protection of
13 A. If the installation protection
is changed to 10 A, the pro-
gramme duration and energy con-
sumption will be increased.
→ "Consumption values",
Page 48
1
42
Display the number of started pro-
grammes.
To save the changes, switch off
5.
the appliance.
Cleaning and servicing
16 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
16.1 Tips on cleaning and
Wipe down the
housing and the
controls with
nothing but water
and a damp
cloth.
Remove all de-
tergent residue,
spray residue or
other residues
immediately.
Cleaning and servicing en
care
This ensures the
parts of the appli-
ance will remain
clean and hy-
gienic.
Fresh deposits
are easier to re-
move without
leaving any
residue.
37
Advertisement
Table of Contents
