Samsung 400T7A User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Desktop
  5. 400T7A
  6. User manual

Samsung 400T7A User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
400T7A/400S7A
400T7B/400S7B
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Samsung 400T7A

Summary of Contents for Samsung 400T7A

  • Page 1 400T7A/400S7A 400T7B/400S7B User Manual...

  • Page 2: Table Of Contents

    Exchanging the CMOS battery CD Drive (ODD, Optional) Memory Card Slot (Optional) Chapter 4. Backup / Restore Connecting an External Display Device Connecting Speakers Samsung Recovery Solution (Optional) Adjusting the Volume Chapter 5. Appendix Wired Network Samsung Update Important Safety Information...
  • Page 3 Chapter 1. Getting Started Before You Start Safety Precautions Ergonomic tips Package Contents Overview Installing the Computer Turning the Computer On and Off...

  • Page 4: Before You Start

    User Guide may not be provided and/or changed by Start > All Programs • upgrade. Start > All Programs > Samsung • Note that the computer environment referred in the User Guide may not be the same as your own environment.
  • Page 5 Caution yourself or damage your property. Samsung Electronics shall not be liable for any data loss. Please take care to avoid losing any important data and backup your data to prevent any such data loss.
  • Page 6 Before You Start Chapter 1. Getting Started About the Product Capacity Representation Standard About the capacity representation of the storage The capacity of the storage device (HDD, SSD) of the manufacturer is calculated assuming that 1KB=1,000 Bytes. However, the operating system (Windows) calculates the storage device capacity assuming that 1KB=1,024 Bytes, and therefore the capacity representation of the HDD in Windows is smaller than the actual capacity due to the difference in capacity calculation.

  • Page 7: Safety Precautions

    Do not touch with wet hands. • Do not use a damaged power cord. • Since this is commonly applied to Samsung Computers, • Do not overload a multi-outlet or an extension cord beyond some pictures may differ from actual products.
  • Page 8 Failure to do so may result in electric shock or fire due to the • Samsung cannot be responsible for the user’s safety when malfunction of the inner part. using accessories or supplies that are not approved by Samsung.
  • Page 9 If the computer is dropped or broken, disconnect the power cord A blocked vent causes the computer to overheat, resulting in an and contact a Samsung Service Center. explosion, fire, burns, or computer malfunction. Using a broken computer may result in electric shock or fire.
  • Page 10 Safety Precautions Chapter 1. Getting Started Do not place heavy objects on the product. Caution This may cause a problem with the computer. In addition, the object may fall and cause injury or damage the computer. Failure to follow instructions marked with this symbol may result in minor physical injury or damage to the computer.
  • Page 11 Failure to do so may result in damage to the product. Broken glass or acrylic could cause injury to your hands and face. Take the device to a Samsung Service Center to have it repaired. If the product emits smoke or there is a burning smell, disconnect the power plug from the wall outlet and contact a When using wireless communication (LAN, Bluetooth, etc.)
  • Page 12 The airport security devices that check Do not attempt to upgrade the computer, unless you are carry-on luggage, such as conveyor belts, use X-rays instead of qualified. Otherwise, contact a Samsung Service Center or an magnetism and will not damage a drive. authorized technician.
  • Page 13 The data may be lost and irrecoverable due to a computer virus. • The data may be lost if the power is turned off while running an application. • Samsung is not liable for any loss of data on the storage device.

  • Page 14: Ergonomic Tips

    Ergonomic tips Chapter 1. Getting Started Maintaining the proper posture during computer use is very • Use an adjustable chair with firm, comfortable support. important to prevent physical injury. Improper or prolonged • Adjust the height of your chair so that thighs are horizontal to keyboard use may result in repetitive strain injury.
  • Page 15 Ergonomic tips Chapter 1. Getting Started Arms and hands • When using the keyboard and touchpad, the shoulders should be relaxed. The upper arm and forearm should form an angle that is slightly greater than a right angle, with the wrist and hand in almost a straight line.
  • Page 16 Ergonomic tips Chapter 1. Getting Started Eye position and display illumination Hearing and volume control VOLUME Check your volume! • Ensure that the volume is not too loud before using the headset or earpiece. Excessive exposure to loud sounds can •...
  • Page 17 Ergonomic tips Chapter 1. Getting Started Operating conditions Use caution when exposed to flashing lights. • While using your computer, leave some lights on in the room • Take at least a 10 minute break every hour. and do not hold the screen too close to your eyes. •...

  • Page 18: Package Contents

    Package Contents Chapter 1. Getting Started Contents of 400T7A/400T7B Keyboard Mouse Computer Power Cord • The appearance and color of the keyboard and mouse may differ depending on your computer model. • The appearance of the power cord may differ from country to country.
  • Page 19 Package Contents Chapter 1. Getting Started Contents of 400S7A/400S7B Keyboard Mouse Computer Power Cord • The appearance and color of the keyboard and mouse may differ depending on your computer model. • The appearance of the power cord may differ from country to country. •...

  • Page 20: Overview

    Overview Chapter 1. Getting Started Front View of 400T7A/400T7B Memory Card Slot (Optional) CD Drive (ODD, Optional) or CD Drive expansion space (Optional) A card slot supports memory cards. CD Drive (ODD, Optional) This drive allows you to read CDs or DVDs.
  • Page 21 Overview Chapter 1. Getting Started Rear View of 400T7A/400T7B PS/2 Port (for PS/2-compatible keyboards or mouse devices) AC-IN Port You can connect a PS / 2 type Keyboard/Mouse here. You can connect the power cord here. Printer Port (Optional) Internal Graphics Port (Optional) You can connect a parallel device such as a printer here.
  • Page 22 Overview Chapter 1. Getting Started Front View of 400S7A/400S7B CD Drive (ODD, Optional) This drive allows you to read CDs or DVDs. Memory Card Slot (Optional) A card slot supports memory cards. Power button and status light Turns the computer on/off and indicates Headphone Jack the operating status of the computer via the border color.
  • Page 23 Overview Chapter 1. Getting Started Rear View of 400S7A/400S7B PS/2 Port (for PS/2-compatible keyboards or mouse devices) Internal Graphics Port (Optional) You can connect a PS / 2 type Keyboard/Mouse here. DVI Port (Supports DVI-I or DVI-D)  Printer Port (Optional) RGB Port ...

  • Page 24: Installing The Computer

    Connect the keyboard and the mouse to corresponding ports. The keyboard and the mouse may vary depending on the model. When the mouse supporting USB 2.0 is connected to the USB 3.0 port, it operates with the USB 2.0 speed. 400T7A/400T7B 400S7A/400S7B •...
  • Page 25 Installing the Computer Chapter 1. Getting Started Connecting the Monitor/TV When Using the Internal Graphics Card (Optional) Connect to the RGB Port or HDMI Port. 400T7A/400T7B • 400S7A/400S7B • DVI Port DVI Port RGB Port RGB Port HDMI Port HDMI Port...
  • Page 26 Installing the Computer Chapter 1. Getting Started When Using the External Graphics Card (Optional) Connect to the RGB Port, HDMI Port, or DVI Port. 400S7A/400S7B • • 400T7A/400T7B DVI Port HDMI Port DVI Port HDMI Port RGB Port Port •...
  • Page 27 Installing the Computer Chapter 1. Getting Started Connecting the Speaker and the LAN Cable Connect the speaker and the LAN cable to corresponding ports. 400T7A/400T7B • 400S7A/400S7B • Connect the LAN cable Connect the LAN cable Connect the Speaker Connect the Speaker...
  • Page 28 Installing the Computer Chapter 1. Getting Started Connecting the Power Cord Plug the power cord into the AC-IN port of the computer. 400T7A/400T7B • 400S7A/400S7B • AC-IN Port AC-IN Port...

  • Page 29: Turning The Computer On And Off

    Reconnect the power cable and press the Power button. The computer will turn on. Power Button [400T7A/400T7B] [400S7A/400S7B] When you turn the computer on for the first time, the Windows activation screen appears. You must register your Windows information to use the...
  • Page 30 Turning the Computer On and Off Chapter 1. Getting Started Turning the computer off • Since the procedures to turn the computer off may differ depending on the installed operating system, please turn the computer off according to the procedures for the purchased operating system.
  • Page 31 Chapter 2. Using the computer Keyboard Mouse CD Drive (ODD, Optional) Memory Card Slot (Optional) Connecting an External Display Device Connecting Speakers Adjusting the Volume Wired Network Samsung Update...

  • Page 32: Keyboard

    Keyboard Chapter 2. Using the computer The appearance and color of the keyboard may differ with the model. Function keys Additional keys Indicators These operate various program You can delete/enter/edit text or These indicate whether functions. You can use them move the cursor up or down the page Num Lock, Caps Lock or differently depending on the...

  • Page 33: Mouse

    Mouse Chapter 2. Using the computer Click function A mouse is a user interface that enables users to move the cursor and pointer on the screen. Briefly press the left mouse button once. The appearance and color of the mouse may differ depending on If you click this mouse button once, the corresponding program is your computer model.
  • Page 34 Mouse Chapter 2. Using the computer Right click function Scroll Function If you right-click on the mouse once, the context-sensitive menu Turn the wheel upwards or downwards and the screen is scrolled of the current program appears. up or down accordingly. Drag function Dragging refers to clicking an item and moving the item to another position while holding the mouse button down.

  • Page 35: Cd Drive (Odd, Optional)

    Push the CD tray to close it. A CD drive’s reading and writing speed may differ depending on the condition and type of the media. Inserting and Ejecting a CD (400T7A/400T7B) Press the Eject button for the CD drive (ODD) to open the CD tray.
  • Page 36 CD Drive Chapter 2. (ODD, Optional) Using the computer When you press the Eject button again, the CD tray will close. Inserting and Ejecting a CD (400S7A/400S7B) Press the Eject button for the optical disk drive to open the CD tray. Eject button Do not insert small discs such as 80mm CDs into the computer when the computer is vertical.

  • Page 37: Memory Card Slot (Optional)

    Memory Card Slot Chapter 2. (Optional) Using the computer Use a memory card as a removable storage device and transfer Abbreviation Description data to other digital devices, such as digital cameras. MS-Pro Memory Stick Pro Purchase a memory card with the necessary capacity for the MS-Pro Duo Memory Stick Pro Duo requirement.
  • Page 38 Memory Card Slot Chapter 2. (Optional) Using the computer Inserting a memory card For the 400S7A/400S7B models, insert the memory card with the gold plated side facing to the right. If a dummy card or a memory card adapter is inserted in the memory card slot, remove it.
  • Page 39 Memory Card Slot Chapter 2. (Optional) Using the computer Formatting a memory card • To use a memory card to exchange data with a digital device, such as a digital camera, formatting the data with Format the memory card to remove all data or before using it for the digital device is recommended.

  • Page 40: Connecting An External Display Device

    Therefore, when multiple ports are supported, connect a display • The location of the port may differ depending on the graphics card. device to a port that provides the better visual quality. When Using the External Graphics Card (Optional) [400T7A/400T7B] [400S7A/400S7B]      ...
  • Page 41 Connecting an External Display Device Chapter 2. Using the computer About the connection cable Users should additionally purchase the necessary connection cables. DVI Cable HDMI Cable A cable used to connect A cable used to connect to a DVI port. to a HDMI port.
  • Page 42 When using the external graphics card, connect external display additionally). devices to the external graphics card ports. Connect an external display device to the DVI, HDMI, RGB port and select External IN on the external display device. [400T7A/400T7B] • L-AUDIO-R VIDEO HDMI •...
  • Page 43 Connecting an External Display Device Chapter 2. Using the computer Setting up the screen when two devices are connected Connect the power cable to the connected monitor, TV, or projector, and turn on the power. When you press the Windows key , the screen with monitor mode options will appear.
  • Page 44 Connecting an External Display Device Chapter 2. Using the computer ► For NVIDIA graphics cards Setting up HDMI TV (Optional) By connecting the computer to a TV with a HDMI port, you can Right-click over the Desktop and click NVIDIA Control Panel. enjoy both a high visual quality and a high sound quality.
  • Page 45 Connecting an External Display Device Chapter 2. Using the computer Setting up HDMI TV audio ► For Intel graphics cards You can configure the sound of the computer to be played Right-click over the Desktop and click Graphics Properties. through the HDMI TV. You have to configure the sound device in the Control Panel If a window appears where you can select the mode, select whenever you connect the HDMI TV in order to hear sound from...
  • Page 46 Connecting an External Display Device Chapter 2. Using the computer Change the setting to HDMI Output (or HDMI device) if Speakers is selected as the playback device, click Set Default and click OK.

  • Page 47: Connecting Speakers

    You can connect 5.1 channel analog speakers to the ports at the back. ► Front Audio Ports Since the speaker ports at the back are for amplifying a speaker system, the output of these ports may differ from the [400T7A/400T7B] [400S7A/400S7B] ports at the front. Connect the headphones...
  • Page 48 Connecting Speakers Chapter 2. Using the computer icon, select the Rear speaker output Double-click the Connecting Analog Speakers item of the Back Pannel and click OK. You can connect up to 6 speakers to the audio jacks on the rear panel of the computer for 5.1 channel sound.

  • Page 49: Adjusting The Volume

    Adjusting the Volume Chapter 2. Using the computer You can adjust the volume using the keyboard and the volume If you adjusted the volume, but no sound was output control program. Right-click the Volume icon in the taskbar and select The Volume icon appears on the taskbar when speakers or Playback devices >...

  • Page 50: Wired Network

    Wired Network Chapter 2. Using the computer Click Start > Control Panel > Network and Internet > A wired network is a network environment used for a company Network and Sharing Center and click on Change adapter network or broadband internet connection at home. settings in the left menu pane.
  • Page 51 Wired Network Chapter 2. Using the computer Select Internet Protocol Version 4 (TCP/IPv4) from the list Configure the IP settings. of Network Components and click Properties. When using DHCP, select Obtain an IP address automatically. To use a static IP address, select Use the following IP address, and set the IP address manually.
  • Page 52 Wired Network Chapter 2. Using the computer Using the <Wake On LAN> Function For Windows 7, Wake On LAN is not supported Ping. <Wake On LAN> is a function that activates the system from Sleep mode when a signal (such as a ping or magic packet command) When connected to a 100Mbps/1Gbps wired LAN and the arrives over the network (wired LAN).

  • Page 53: Samsung Update

    • Images and features may differ depending on the model and the application version. Select Start ( ) > All Programs > Samsung > Samsung Update. Read and agree to the User Agreement. Select items to update and select OK.
  • Page 54 Chapter 3. Settings and Upgrade BIOS Setup Setting a Boot Password Changing the Boot Priority Disassembling the computer Interior computer components Main board structure Adding cards Adding memory Adding the hard drive (HDD) Exchanging the CD drive (ODD) Exchanging the CPU Exchanging the CMOS battery...

  • Page 55: Bios Setup

    BIOS Setup Chapter 3. Settings and Upgrade The BIOS Setup enables you to configure your computer hardware Entering the BIOS Setup according to your needs. Turn the computer on. • Use the BIOS setup to define a boot password, change the booting priority, or add a new device.
  • Page 56 BIOS Setup Chapter 3. Settings and Upgrade The BIOS Setup Screen Setup Menu Description The BIOS Setup menus and items may differ depending on your computer model. This is a description about the basic SysInfo specifications of the computer. Using this menu, you can configure the major Setup Menu Advanced chipsets and additional functions.
  • Page 57 BIOS Setup Chapter 3. Settings and Upgrade System Setup Keys The keyboard image may differ from the actual keyboard. In the Setup, you have to use the keyboard. Press to view the Setup Help. Up & Down Press to move up and down. Keys F5/F6 Press to change the item value.

  • Page 58: Setting A Boot Password

    Setting a Boot Password Chapter 3. Settings and Upgrade If you set a password, you have to enter the password when you Setting a Supervisor Password turn the computer on or enter the BIOS Setup. If you set a Supervisor Password, you need to enter the password By configuring a password, you can restrict system access to when you turn the computer on or enter the BIOS Setup.
  • Page 59 Setting a Boot Password Chapter 3. Settings and Upgrade Enter a password, press <Enter>, re-enter the password for Setting a User Password confirmation, and press <Enter> again. Using the User Password, you can turn the computer on but you The password can be up to 20 alphanumeric characters. cannot change the major settings of the BIOS Setup because you Special characters are not allowed.
  • Page 60 Setting a Boot Password Chapter 3. Settings and Upgrade Setting up a Hard Disk Drive Password (Optional) Deactivating the Password If you set a password for a hard disk drive, it cannot be accessed Press <Enter> on the password to be deactivated. For from another computer.
  • Page 61 Setting a Boot Password Chapter 3. Settings and Upgrade If you have forgotten an administrator or user password You can cancel the password using the computer main board’s CMOS battery. If you have lost the hard drive password, you need support from a service center, and there is a separate charge for these services.

  • Page 62: Changing The Boot Priority

    Changing the Boot Priority Chapter 3. Settings and Upgrade Press <Enter> on the Boot Option #1 item. Changing the Boot Priority Select the drive to boot from. Select the Boot menu in the BIOS Setup. Press <Enter> on the Boot Device Priority item. BIOS Setup SysInfo Advanced...

  • Page 63: Disassembling The Computer

    Disassembling the computer Chapter 3. (for 400T7A/400T7B models only) Settings and Upgrade You must open the cover to replace or add computer parts. The Opening the computer cover computer's form and interior structure may differ depending on selected specifications. Lie the computer on its side and use a screwdriver to remove If you are not comfortable doing the expansion yourself, please the 2 screws from its back.
  • Page 64 Disassembling the computer Chapter 3. (for 400T7A/400T7B models only) Settings and Upgrade Lift the cover in the direction of the arrow. Turn the screws in the back of the computer to the right to tighten. To close the cover again, lift it as in picture and then pull it ...
  • Page 65 Disassembling the computer Chapter 3. (for 400T7A/400T7B models only) Settings and Upgrade Pull the bottom two latches upward and push the top two Removing the front cover latches to the center to remove the front cover. You must remove the front cover to exchange the CD drive.
  • Page 66 Disassembling the computer Chapter 3. (for 400S7A/400S7B models only) Settings and Upgrade You must open the cover to replace or add computer parts. The Opening the computer cover computer’s form and interior structure may differ depending on selected specifications. If you are not comfortable doing the expansion yourself, please Lie the computer on its side and use a screwdriver to remove contact a service center for support.
  • Page 67 Disassembling the computer Chapter 3. (for 400S7A/400S7B models only) Settings and Upgrade Lift the cover in the direction of the arrow. Turn the screws in the back of the computer to the right to tighten. To close the cover again, lift it as in picture and then pull it ...

  • Page 68: Interior Computer Components

    Interior computer components Chapter 3. Settings and Upgrade • The computer's interior structure may differ depending on the model and selected specifications. • The installed cooling fan may differ by model. [400T7A/400T7B] [400S7A/400S7B] CD drive or CD drive CD drive expansion space...

  • Page 69: Main Board Structure

    Main board structure Chapter 3. Settings and Upgrade Cooling fan power Auxiliary power connector connector Memory socket Cooling fan / Heat sink / CPU (central processing unit) Main power connector CMOS battery PCI Express X16 card slot Front power / LED connector PCI Express X1 card slot Front USB connector PCI card slot...

  • Page 70: Adding Cards

    Adding cards Chapter 3. (for 400T7A/400T7B models only) Settings and Upgrade Check that there are slots which can be used for expansion and Open the computer cover. then check that the card you want to install is compatible with your computer.
  • Page 71 Adding cards Chapter 3. (for 400T7A/400T7B models only) Settings and Upgrade Fix the card in place with the screws you removed. Connect the necessary internal cables according to the manual for the card you purchased. Close the cover and connect external cables, including the power cable.
  • Page 72 Adding cards Chapter 3. (for 400S7A/400S7B models only) Settings and Upgrade Check that there are slots which can be used for expansion and Open the computer cover. then check that the card you want to install is compatible with your computer. Remove the screw holding the bracket.
  • Page 73 Adding cards Chapter 3. (for 400S7A/400S7B models only) Settings and Upgrade Fix the card in place with the screws you removed. Connect the necessary internal cables according to the manual for the card you purchased. Close the cover and connect external cables, including the power cable.

  • Page 74: Adding Memory

    Adding memory Chapter 3. Settings and Upgrade Check that there is a memory socket to be used for expansion on Insert the memory in the direction of the socket and slot and the main board and then prepare memory that can be used in push until it is completely installed.

  • Page 75: Adding The Hard Drive (Hdd)

    Adding the hard drive (HDD) Chapter 3. (for 400T7A/400T7B models only) Settings and Upgrade Remove power cables or signal cables connecting the current Parallel (IDE) hard drive connections are not available on this hard drive. computer’s main board, so you cannot use parallel (IDE) hard drives with it.
  • Page 76 Adding the hard drive (HDD) Chapter 3. (for 400T7A/400T7B models only) Settings and Upgrade Insert the new hard drive and secure it with four screws. Connect the other end of the new hard drive’s signal cable to the main board’s SATA 2 port.
  • Page 77 Adding the hard drive (HDD) Chapter 3. (for 400S7A/400S7B models only) Settings and Upgrade Pull and lift the CD bracket as in the picture to tilt it upward. Parallel (IDE) hard drive connections are not available on this computer's main board, so you cannot use parallel (IDE) hard drives with it.
  • Page 78 Adding the hard drive (HDD) Chapter 3. (for 400S7A/400S7B models only) Settings and Upgrade Remove power cables or signal cables connecting the current Connect the power cable and signal cable to the hard drive hard drive. and then install the hard drive case in the computer. Connect this to the new hard drive.
  • Page 79 Adding the hard drive (HDD) Chapter 3. (for 400S7A/400S7B models only) Settings and Upgrade Connect the other end of the new hard drive’s signal cable to Fix the hard drive case in place with the screw. the main board’s SATA 2 port. Close the computer cover and refer to the manual for the The hard drive supporting SATA 3.0 should be connected to hard drive you purchased to set it up as necessary.

  • Page 80: Exchanging The Cd Drive (Odd)

    Exchanging the CD drive (ODD) Chapter 3. (for 400T7A/400T7B models only) Settings and Upgrade The computer can be replaced with the series (SATA) type drive. Remove the CD drive screws and replace the CD drive with a new CD drive.
  • Page 81 Exchanging the CD drive (ODD) Chapter 3. (for 400T7A/400T7B models only) Settings and Upgrade Connect the power and the signal cables to the new CD drive. Power cable Signal cable The picture above displays a computer without the CD drive bracket, and should be used as a reference only.
  • Page 82 Exchanging the CD drive (ODD) Chapter 3. (for 400S7A/400S7B models only) Settings and Upgrade Gently push the CD drive bracket inward and then lift  • Only CD drives of the correct type for this model can be upward to remove. ...
  • Page 83 Exchanging the CD drive (ODD) Chapter 3. (for 400S7A/400S7B models only) Settings and Upgrade Remove the 4 screws holding the lower bracket and then Connect the power/signal cables to the CD drive and remove the CD drive. Put in the new CD drive. reassemble the CD drive bracket in the opposite order as you disassembled it, then screw in the 2 screws.

  • Page 84: Exchanging The Cpu

    Exchanging the CPU Chapter 3. Settings and Upgrade Remove the 4 screws holding the cooling fan and then take • If you are not comfortable doing the replacement yourself, out the cooling fan. please contact a service center for support. However, there is a cost for services related to expansion even during the free service period.
  • Page 85 Exchanging the CPU Chapter 3. Settings and Upgrade Push the CPU lever out slightly to remove and then tilt Lower the bracket and then push the CPU lever downward   the bracket upward and take out the CPU. until it locks in place. ...

  • Page 86: Exchanging The Cmos Battery

    Because the CMOS battery is an expendable part, it may need Turn on the computer. When the Samsung logo appears, to be exchanged for a new battery if a "CMOS Checksum error" press the F2 key to enter BIOS setup and change the settings message appears while the computer is on.

  • Page 87: Chapter 4. Backup / Restore

    Chapter 4. Backup / Restore Samsung Recovery Solution (Optional)

  • Page 88: Samsung Recovery Solution (Optional)

    Samsung Recovery Solution Chapter 4. (Optional) Backup / Restore Samsung Recovery Solution is a program that enables restoring Samsung Recovery Solution Functions or backing up the hard disk drive for when a problem occurs with the computer. Backup/Restore Functions If the computer fails to boot up, you can restore the computer by pressing the F4 key in the booting screen.
  • Page 89 Restore Function Restore is a function that enables restoring the computer to a Not only can you use Samsung Recovery Solution when Windows saved point when the computer was purchased or a user-saved is running, but also when you are unable to boot up into Windows.
  • Page 90 Samsung Recovery Solution Chapter 4. (Optional) Backup / Restore If the initial menu screen appears, click Restore. Select either Basic Restore or Complete Restore from the Restore menu. To restore the computer to the initial state, click Computer Initial State and perform the restoration process according to the instructions that appear on the screen.
  • Page 91 Samsung Recovery Solution Chapter 4. (Optional) Backup / Restore Complete Backup/Restore In the Advanced menu, you can change the size of the hard drive partitions (e.g. C: and D:). A Complete Backup saves the complete image of the C drive •...
  • Page 92 When the system restarts in Restoration Mode, the Complete Backup operation begins. Continue with the backup by following the instructions. • Samsung Recovery Solution supports the DVD+R, DVD-R, DVD+RW and DVD-RW formats. • If the LiveImaging option has been selected, the Complete Backup operation begins without the computer being restarted.
  • Page 93 Connect the removable storage device. – When backing up to another drive Proceed to Step 2. When the Samsung Recovery Solution start screen appears, click Restore and then click Complete Restore. The restoration progress message appears after the computer boots up in restoration mode. If you click OK, the restoration begins.
  • Page 94 Data Backup when data is lost. This guide describes the Backup and Restore procedures on the basis of backing up and restoring by using DVD. Data Backup When the Samsung Recovery Solution start screen appears, Select Drive D. Select the DVD drive. click Backup and then click Data Backup.
  • Page 95 Backup / Restore Data Restore Deleting the Samsung Recovery Solution You can delete the Samsung Recovery Solution if you don't use it. – When backing up onto DVD Turn the computer on and insert the backup DVD into the This feature may not be available depending on the version.
  • Page 96 Be careful that once the recovery area is Windows. deleted, the Samsung Recovery Solutions will not work anymore. The size of Samsung Recovery Solution varies by models because of the different size of applied programs.
  • Page 97 Chapter 5. Appendix Important Safety Information Replacement Parts and Accessories Regulatory Compliance Statements WEEE Symbol Information Samsung Packaging Take-Back Program Product Specifications Glossary...

  • Page 98: Important Safety Information

    Important Safety Information Chapter 5. Appendix • If your computer has a voltage selector switch, make sure that Safety Instructions the switch is in the proper position for your area. Your system is designed and tested to meet the latest standards •...
  • Page 99 Important Safety Information Chapter 5. Appendix Care During Use The Instruction On Safety Operation of NotePC • Do not walk on the power cord or allow anything to rest on it. 1. When installing and operating devices please refer to safety requirements in the user manual.

  • Page 100: Replacement Parts And Accessories

    Class 1M laser radiation when operating part is open. non-removable rechargeable batteries in the garbage. Do not view directly with optical instruments. Contact the Samsung Helpline for information on how to dispose • Class 3B invisible laser radiation when open.
  • Page 101 Replacement Parts and Accessories Chapter 5. Appendix General Requirements Connect and Disconnect the AC adapter The requirements listed below are applicable to all countries: The socket-outlet shall be installed near the equipment and shall be easily accessible. • All power cord sets must be approved by an acceptable Do not unplug the power cord by pulling the cable only.

  • Page 102: Regulatory Compliance Statements

    Regulatory Compliance Statements Chapter 5. Appendix Wireless Guidance • Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation (If fitted with 2.4G band or 5G band) regulations require wireless devices to be turned off while traveling in an airplane. Low power, Radio LAN type devices (radio frequency (RF) wireless 802.11ABGN (also known as wireless Ethernet or Wi-Fi) and communication devices), operating in the 2.4GHz/5GHz Band, may...
  • Page 103 Regulatory Compliance Statements Chapter 5. Appendix United States of America • Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Please contact manufacturer for USA and Canada Safety Requirements and Notices service.
  • Page 104 Responsible Party – U.S. Contact Information • Increase the separation between the equipment and receiver. Samsung Electronics America, Inc. • Connect the equipment into an outlet on a circuit different 85 Challenger Road. from that to which the receiver is connected.
  • Page 105 Regulatory Compliance Statements Chapter 5. Appendix If necessary, the user should consult the dealer or an experienced This device is restricted to indoor use due to its operation in the radio/television technician for additional suggestions. The user 5.15 to 5.25 GHz frequency range. FCC requires this product to be may find the following booklet helpful: “Something About used indoors for the frequency range 5.15 to 5.25 GHz to reduce Interference.”...
  • Page 106 For body worn operation, this model meets the FCC RF exposure at multiple power levels so as to use only the power required to guidelines when used with Samsung accessory designated for this reach the network. In general, the closer you are to a wireless base product.
  • Page 107 Discard used batteries according to the 443-742, Korea Manufacturer’s instruction. Samsung Electronics Suzhou Computer Co., Ltd. Attention: Danger d’explosion si les piles sont mal palcées. Remplacez les piles usagées uniquement par des piles de type No. 198, Fangzhou Road, Suzhou Industrial Park, Jiangsu Province, identique ou équivalent recommandees par is fabriquant.

  • Page 108: Weee Symbol Information

    To find the nearest recycling location, go to our website: For more information on safe disposal and recycling visit our www.samsung.com/recycling or call, 1-800-SAMSUNG. website www.samsung.com/in or contact our Helpline numbers - For battery recycling go to call2recycle.org; or call 1-800-822-8837 18002668282, 180030008282.

  • Page 109: Samsung Packaging Take-Back Program

    Samsung Packaging Take-Back Program Chapter 5. Appendix In partnering with select recyclers, Samsung offers packaging take-back at no cost to you. Simply call the following number for the locations nearest you. CRT Processing, LLC (877) 278-0799 Kathy Severson – Logistics contact Dispose unwanted electronics through an approved recycler.

  • Page 110: Product Specifications

    The amount of memory that Windows can use may be smaller than the actual amount of memory available. Input voltage AC200-240 V (for 220) or AC100-240 V 400T7A / 400T7B: 4.5 A, 6.0 A or 6.5 A Input current 400S7A / 400S7B: 4.0 A or 4.5 A Output voltage...
  • Page 111 Product Specifications Chapter 5. Appendix Trademarks Samsung and the Samsung logo are trademarks or registered trademarks of Samsung Electronics. Intel, Pentium®, and Core™ are trademarks or registered trademarks of the Intel Corporation. Microsoft, MS-DOS, Vista, XP, and Windows are trademarks or registered trademarks of the Microsoft Corporation.

  • Page 112: Glossary

    Glossary Chapter 5. Appendix The Glossary lists the terminologies used in this User Manual. For terminologies other than these, look in Windows Help. Backup DHCP (Dynamic Host Configuration Protocol) A way to save the current data to restore it later if necessary. This refers to automatically allocating IP addresses to the users on A backup is a way to restore computer data when the data or the network by the network administrators.
  • Page 113 Glossary Chapter 5. Appendix DVD (Digital Versatile Disk) LAN (Local Area Network) DVD was developed to replace CD (compact disk). Although the A communications network connecting computers, printers and shape and size of the disc are the same as that of a CD, the capacity other devices within a local area such as within a building.
  • Page 114 Glossary Chapter 5. Appendix Network SDHC (Secure Digital High Capacity) card A group of computers and devices, such as printers and scanners, This is the extension of the SD card that supports over 2GB bytes. connected by a communications link. A network can be either SDXC (Secure Digital eXtended Capacity) small or large and can be connected permanently through cables SDXC provides a higher capacity and speed than the SDHC...
  • Page 115 Glossary Chapter 5. Appendix System File Windows Media Player System Files refer to files that are read and used by the Windows A multimedia program included with Windows. Using this operating system. In general, system files must not be deleted or program, you can play a media file, create an audio CD, listen to a moved.

This manual is also suitable for:

400s7a400t7b400s7b

Table of Contents