Table of Contents
Advertisement
Connecting an AV receiver or digital soundbar
You can enjoy Dolby Audio™ multichannel sound from your TV if you connect a digital
amplifier or soundbar (not provided) in either of two ways:
Digital optical audio out (S/PDIF) – Connect a TOSLINK optical cable (not provided) from
the TV to the Optical input on your receiver or soundbar.
®
HDMI® ARC – Connect an HDMI
cable (not provided) from the HDMI (ARC) connector to
®
the HDMI
input on your receiver or soundbar. This connection uses the Audio Return
®
Channel (ARC) feature of HDMI
to output sound from the TV to a compatible device.
®
To use this feature, you must configure the TV to enable HDMI
ARC, as explained in
Enable HDMI® ARC or
eARC.
®
HDMI® eARC – Select models only: Connect an HDMI
cable (not provided) from the
HDMI (eARC) connector to the HDMI (ARC) or HDMI (eARC) input on your receiver or
soundbar. If your receiver or soundbar supports HDMI enhanced ARC (eARC), the TV
can pass through full-resolution sound from programs containing enhanced audio. If
your receiver or soundbar does not support eARC, use the TV's eARC port to make
the ARC connection. The eARC port is backward compatible with the ARC standard.
Preparing for Internet connectivity
If you want to watch streaming content and take advantage of most of the cool
features of your Roku TV, connect it to the Internet through a wireless modem/router
or a wireless access point (not provided). The TV has a built-in wireless LAN adapter.
Note: The TV supports only its internal wireless network adapter—it does not support
the use of a USB network adapter.
Select models have both wired and wireless network connectivity. To use the wired
network connection, connect an RJ-45 Ethernet cable (not provided) from the jack on
the back of your TV to your network router or switch. The wired connection
automatically supports both 10 Base-T and 100 Base-T Ethernet.
10
Advertisement
Table of Contents
