Related Manuals for Siemens SR93EX24MG
Summary of Contents for Siemens SR93EX24MG
- Page 1 SR93EX24MG Dishwasher EN Information for Use Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
-
Page 2: Table Of Contents
Further information and explanations are available online: Table of contents 1 Safety ........... 4 7 Programmes ...... 19 1.1 General information.... 4 7.1 Information for test institutes ... 20 1.2 Intended use...... 4 7.2 Favourite .... 20 1.3 Restriction on user group.. 4 8 Additional functions .... 21 1.4 Safe installation ...... - Page 3 13.3 Information on detergents .. 30 20.2 Protect appliance from frost.. 53 13.4 Adding detergent.... 30 20.3 Transporting the appliance ... 53 20.4 Disposing of old appliance ... 53 14 Tableware ........ 31 14.1 Damage to glass and table- 21 Customer Service.... 53 ware........
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe ¡ for future reference or for the next owner. Do not connect the appliance if it has been damaged in transit. ¡... - Page 5 Safety en WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. Connect and operate the appliance only in accordance with the ▶ specifications on the rating plate. Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating cur- ▶...
-
Page 6: Safe Use
en Safety Contact between the appliance and installation lines may lead to a defect in these lines, e.g. gas pipes and power lines. Gas from a corroded gas pipe can ignite. A damaged power line can cause a short circuit. Check that there is a distance of at least 5 cm between the ap- ▶... - Page 7 Safety en Highly caustic alkaline or highly acidic cleaning agents in conjunc- tion with aluminium parts in the interior of the appliance may cause explosions. Never use highly caustic alkaline or highly acidic cleaning ▶ agents, in particular commercial or industrial products, in con- junction with aluminium parts (e.g.
-
Page 8: Damaged Appliance
en Safety 1.6 Damaged appliance WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. Never operate a damaged appliance. ▶ Never operate an appliance with a cracked or fractured surface. ▶ Never pull on the power cord to unplug the appliance. Always ▶... -
Page 9: Safety Systems
Safety en WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. With redundant appliances, unplug the power cord. Then cut ▶ through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close. -
Page 10: Preventing Material Damage
en Preventing material damage Modified or damaged water hoses Preventing material damage 2 Preventing material may result in material damage and damage to the appliance. damage Never kink, crush, modify or cut ▶ through water hoses. Preventing material damage 2.1 Safe installation Only use the water hoses supplied ▶... -
Page 11: Childproof Lock
Childproof lock en So as not to scratch the finish on ▶ Environmental protection and saving energy 4 Environmental protec- the appliance, do not use sponges with a rough surface or abrasive tion and saving energy cleaning agents. To prevent corrosion, do not use Environmental protection and saving energy ▶... -
Page 12: Installation And Connection
en Installation and connection installing it under a continuous work- Installation and connection 5 Installation and con- top that is securely connected to ad- jacent cabinets. nection Follow the safety instructions. To ensure proper operation, connect → Page 4 Installation and connection the appliance to the power and water Follow the instructions for electrical supply correctly. -
Page 13: Drinking Water Connection
Installation and connection en 5.4 Drinking water connec- tion Connect your appliance to a drinking water connection. Installing the drinking water connection Note If you are replacing the appliance, ¡ you must use a new water supply hose. Consult the installation instructions supplied for the steps required here. -
Page 14: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance Familiarising yourself with your appliance 6 Familiarising yourself with your appliance Familiarising yourself with your appliance 6.1 Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with E number and FD num- ber → Page 54. - Page 15 Familiarising yourself with your appliance en Detergent dispenser Add detergent to the detergent dispenser. → "Detergent", Page 28 Bottom basket Bottom basket → Page 23 Filter system Filter system → Page 44 Dispenser for special salt Add special salt to the dispenser for spe- cial salt. → "Water softening system", Page 25 Tablet collecting tray During the wash cycle tablets automatic- ally fall out of the detergent dispenser into...
-
Page 16: Controls
en Familiarising yourself with your appliance 6.2 Controls You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. With some buttons you can perform different functions. 3 4 5 6 ON/OFF button and reset Switching on the appliance button... - Page 17 Familiarising yourself with your appliance en button If you press for approx. 3 seconds, you can open the basic set- tings. → "Changing basic settings", Page 40 Remote Start → "Remote Start ", Page 41 Timer programming Setting timer programming → Page 34 Door handle Open the appliance door. → Page 33 Display The display shows information about the remaining running time or the ba-...
- Page 18 en Familiarising yourself with your appliance Symbol Description If you have started a pro- gramme, the symbol lights up on the display. If the water inflow or drainage malfunctions, the symbol lights up or flashes on the display. → "Troubleshooting", Page 46...
- Page 19 Programmes en Programmes 7 Programmes You can find an overview of the pro- ted. The running time will change if Programmes grammes that can be selected here. the rinse aid system is switched off Different programmes, which can be or rinse aid needs to be added. found on the control panel of your The consumption values can be appliance, are available depending...
-
Page 20: Information For Test Institutes
en Programmes Programme Programme se- quence Tableware: Time-optimised: Delicate tableware, cutlery, tem- Cleaning 45 °C ¡ ¡ Speed 45° perature-sensitive plastics and Intermediate rinse ¡ glasses Final rinse 55 °C ¡ Level of soiling: Lightly adhering fresh food rem- ¡ nants Use only if appliance is unloaded. Machine Care 70 °C Machine Care → "Favourite ", Page 20... - Page 21 Additional functions en Additional functions 8 Additional functions You can find an overview of the additional functions that can be selected here. Additional functions Different additional functions, which can be found on the control panel of your appliance, are available depending on the appliance configuration. You can se- lect certain additional functions depending on the programme.
-
Page 22: Features
en Features Press in the levers on the right and Features 9 Features left on the outside of the basket. You can find an overview of the pos- Features sible features of your appliance and how to use them here. These features depend on the model of your appliance. -
Page 23: Etagere
Features en 9.2 Etagere Use the cutlery shelf and space un- derneath for small cups and glasses or for large items of cutlery, e.g. cooking spoons or serving cutlery. 9.4 Folding prongs Use the folding prongs to position tableware securely, e.g. plates. If you do not need the cutlery shelf, you can fold it up. -
Page 24: Cutlery Drawer
en Before using for the first time Push the lever forwards and fold To fold down the folding spines, ▶ down the prongs . push the lever forwards and fold down the folding spines . To use the prongs again, fold them back up. -
Page 25: Water Softening System
Water softening system en To remove any marks from water Water softening system 11 Water softening sys- or other residues, we recommend you operate the appliance without tableware before using it for the first time. Hard water leaves limescale on the Water softening system tableware as well as the washing Tip: You can change these settings tank, and parts of the appliance may... -
Page 26: Special Salt
en Water softening system The display shows Hxx. Note: Only use special salt for dishwashers. The display shows . Do not use salt tablets. Press repeatedly until the Do not use table salt. right water hardness has been set. Add the special salt to the dis- The value H04 is set at the factory. -
Page 27: Regeneration Of The Water Softening System
Rinse aid system en The water hardness is 0 - 8 °E. ¡ Additional power consump- 0.05 You do not need to use special tion in kWh salt. The consumption values specified Press . are laboratory measurements determ- To open the basic settings, press ined in accordance with the currently for 3 seconds. -
Page 28: Setting The Amount Of Rinse Aid
en Detergent Add rinse aid up to the max mark. To save the settings, press for 3 seconds. 12.3 Switching the rinse aid system off If you find the rinse aid refill indicator irritating, e.g. when using combined detergents with a rinse aid compon- ent, you can switch the rinse aid sys- tem off. -
Page 29: Unsuitable Detergents
Detergent en starch and remove protein. Oxygen- With powder and liquid detergent the based bleaching agents are generally dosage can be individually adjusted used to remove coloured marks, e.g. to the level of soiling of the table- tea or ketchup. ware. For better washing and drying results Note: Follow the manufacturer's in- and to avoid damage to the appli-... -
Page 30: Information On Detergents
en Detergent Add the detergent to the dry deter- 13.3 Information on deter- gent dispenser. gents Follow the instructions on detergents 50 ml in everyday use. 25 ml Detergents marked as "organic" or ¡ 15 ml "ecological" (environmentally friendly) generally contain lower levels of active agents or com- pletely dispense with certain sub- stances. -
Page 31: Tableware
Tableware en Close the lid of the detergent dis- 14.1 Damage to glass and penser. tableware Only put glasses and china in the dishwasher if it is marked as dish- washer-safe by the manufacturer. Avoid damage to glass and table- ware. Cause Recommenda- tion The following... -
Page 32: Arrange Tableware
en Tableware allowing steam to escape and water Cause Recommenda- to leak out around the door. This tion could damage your kitchen units. Highly caustic al- If you are using kaline or highly highly caustic al- acidic cleaning kaline or highly solutions, in par- acidic cleaning ticular commer-... -
Page 33: Removing Tableware
Basic operation en To save resources, do not pre- 14.3 Removing tableware rinse tableware under running wa- ter. WARNING Observe the following when arran- Risk of injury! ging tableware: Hot tableware can cause burns to the – Put heavily soiled tableware in skin. -
Page 34: Setting A Programme
en Basic operation The Eco 50° programme is set by 15.5 Setting timer program- default. ming The Eco 50° programme is espe- cially environmentally friendly and You can delay the start of the pro- ideal for normally soiled tableware. gramme by up to 24 hours. It is the most efficient programme Press ... -
Page 35: Terminate Programme
Basic operation en will help prevent excess pressure building up in the appliance and stop the appliance door bursting open. Open the appliance door carefully. Press . The programme is saved and the appliance switches off. Press to resume the pro- gramme. -
Page 36: Basic Settings
en Basic settings Basic settings 16 Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings 16.1 Overview of the basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H00 - H07... - Page 37 Basic settings en Basic setting Display text Selection Description InfoLight I00 - I01 Switch InfoLight on or off. While the programme is run- ning, a spot of light is pro- jected onto the floor below the appliance door. This light will not be visible if the appli- ance is installed at eye level with the cabinet front fitted flush.
- Page 38 en Basic settings Basic setting Display text Selection Description Door opening c00 - c03 Electric door opening is ¡ activated with the setting "c00". You open the appli- ance door by pressing on the upper middle section of the appliance door once.
- Page 39 Basic settings en Basic setting Display text Selection Description autoOpen Dry o00 - o02 Activate or deactivate auto- matic opening of the appli- ance door during the drying phase. If the function has been ac- tivated, the running time may increase. The following settings are possible: With the setting "o00"...
-
Page 40: Changing Basic Settings
en Home Connect Basic setting Display text Selection Description Remote Start rc0 - rc2 Activate or deactivate → "Remote Start ", Page 41. The following settings are possible: With the setting "rc0", the ¡ function is permanently deactivated. With the setting "rc1", the ¡ function can be selected via the button. -
Page 41: Setting Up The Home Connect App
Home Connect en depends on the availability of Open the Home Connect app and Home Connect services in your coun- scan the following QR code. try. You can find information about this at: www.home-connect.com. To be able to use Home Connect, you must first set up the connection to the WLAN home network (Wi-Fi and to the Home Connect app. -
Page 42: Data Protection
en Cleaning and servicing 17.4 Data protection Cleaning and servicing 18 Cleaning and servi- Please see the information on data cing protection. The first time your appliance is To keep your appliance working effi- Cleaning and servicing registered on a home network ciently for a long time, it is important connected to the Internet, your to clean and maintain it carefully. -
Page 43: Machine Care
Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.siemens-home.bsh- mend cleaning your appliance at reg- group.com/store or from customer ular intervals. service. -
Page 44: Filter System
en Cleaning and servicing Follow the safety instructions given ¡ Cleaning filters on the packagings of the machine Soiling in the dishwashing water may care products and machine clean- block the filters. ers. After each wash check the filters Remove any coarse soiling in the for residue. -
Page 45: Cleaning Spray Arms
Cleaning and servicing en Press the locking catches 18.6 Cleaning spray arms gether and lift the coarse filter out Limescale and soiling in the dish- . washing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. Unscrew the upper spray arms and pull down to remove Clean the filter elements under run-... -
Page 46: Troubleshooting
This will avoid unneces- sary costs. Tip: You can find further information and explanations on troubleshooting on- line by scanning the QR code in the table of contents and on our website siemens-home.bsh-group.com. WARNING Risk of electric shock! Incorrect repairs are dangerous. - Page 47 Troubleshooting en Fault Cause and troubleshooting E:32-00 will light up Water tap is jammed or furred up. alternately or indicator Turn on the water tap. ▶ for water supply lights The flow rate must be at least 10 l/min when the water supply is open.
- Page 48 en Troubleshooting Fault Cause and troubleshooting E:61-03 will light up Not an appliance fault. Siphon connection is still alternately. Water is closed or the wastewater hose is kinked or blocked. not drained. Check the connection to the siphon and open if ne- cessary.
- Page 49 Troubleshooting en Fault Cause and troubleshooting All LEDs lit up or Electronics have detected a fault. flashing. Press the main switch button for approx. 4 seconds. The appliance is reset and restarted. If the problem occurs again: Switch off the appliance. ‒ Pull out the mains plug or switch off the fuse in ‒...
- Page 50 en Troubleshooting Fault Cause and troubleshooting Remnants of food on Insert the filters properly. tableware. → "Filter system", Page 44 Engage the filters. Washing programme selected too weak. Select a more intensive washing programme. ▶ → "Programmes", Page 19 Tableware has been precleaned too intensely. The sensors chose a weaker programme.
- Page 51 Troubleshooting en Fault Cause and troubleshooting Rust spots on cutlery. Cutlery is not sufficiently rust-resistant. Knife blades are often more severely affected. Use rust-resistant tableware. ▶ Cutlery may also rust if washed together with rusting items. Do not wash rusting items. ▶...
-
Page 52: Clean Wastewater Pump
en Transportation, storage and disposal Insert the pump cover and press 19.1 Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 53: Protect Appliance From Frost
Customer Service en 20.2 Protect appliance from 20.4 Disposing of old appli- frost ance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely. -
Page 54: Product Number (E-Nr.), Production Number (Fd) And Consecutive Numbering (Z-Nr.)
en Customer Service Customer Service for a period of at 21.2 AQUA-STOP guarantee least 10 years from the date on In addition to warranty claims against which your appliance was placed on the seller under the purchase agree- the market within the European Eco- ment and in addition to our manufac- nomic Area. -
Page 55: Technical Specifications
Technical specifications en Technical specifications 22 Technical specifications Technical specifications Weight Max.: 45 kg Voltage 220 - 240 V, 50 Hz or 60 Hz Power rating 2000 - 2400 W Fuse 10 - 16 A Water pressure min. 50 kPa (0.5 bar) ¡ max. 1000 kPa (10 bar) ¡ Inlet rate Min. 10 l/min Water temperature Cold water. -
Page 56: Statement Of Compliance For Great Britain
Conformity essential requirements and other rel- A detailed Declaration of Conformity evant provisions of Directive can be found online at siemens- 2014/53/EU. home.bsh-group.com/uk/ among the A detailed RED Declaration of Con- additional documents on the product formity can be found online at page for your appliance. - Page 57 Declaration of Conformity en The manufacturer, BSH Hausgeräte GmbH deems that it has complied with provision 5.1-1 of ETSI EN 303 ¡ 645 v2.1.1 and, where relevant, provision 5.1-2 of ETSI EN 303 645 v2.1.1; provision 5.2-1 of ETSI EN 303 ¡...
- Page 60 EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...