Advertisement
CONFIGURE
SYSTEM BUT
DO NOT INSERT
SSETTES
CA!
INTO DRIVES
YET
TURN
PERIPHERALS
ON
ANY LOW
BATTERIES?
FIX PROBLEM
TURN HP-41 ON
How To Do A Mass Copy
DOES MASTER
TAPE HAVE
PRIVATE FILES?
PRIVATE
ERROR
WAIT UP T0 45
MINUTES WHILE
PROCESS OF
INITIALIZE,
COPY, AND
VERIFY CONTINUES
CHECK SYSTEM
PRINTER FOR
ERRORS
ERRORS?
REMOVE TAPE
COPIES
Note: Since MSCOPY destroys the data
on all cassettes except the one in the first
drive, make sure that you know which
drive is the first drive in the loop before
attempting to execute MSCOPY. When
you execute MSCOPY,the busy light on
the first drive will flash for 10 seconds
before the copy process begins. This gives
you a last chance to save your master
cassette if it is in the wrong drive. If the
master is not in the drive with the flashing
light, press
immediately and move
the master cassette to the correct drive.
Press
again to restart the copy
process.
Note: This module has XROM numbers
which are incompatible with the Machine
Design Application Module. If you plug
both of these modules into the same
HP-41, operation will be unpredictable.
Advertisement
