Table of Contents
Advertisement
A-U670/A-670/A-U671/NS-BP401/NS-BP301
1. Connect the system terminals of A-U670/A-670 and CD-NT670/CD-NT670D by using the system connection cable.
2. Connect the power cable of A-U670/A-670, CD-NT670/CD-NT670D to the AC outlet.
Rear view
A-U670/A-670
3. While pressing the "
power and release the 2 keys.
The self-diagnostic function mode is activated.
4. Using the INPUT knob of CD-NT670/CD-NT670D, select the self-diagnostic function menu 14-1.
Then, "14-1. Waiting..." is displayed.
"
" (Power) key
5. Activate the self-diagnostic function of A-U670/A-670.
(For the method to activate the self-diagnostic function of A-U670/A-670, refer to the next page.)
20
Power cable
System connection cable
" and " " (stop) keys of CD-NT670/CD-NT670D, press the " " (Power) key to turn on the
Keys of CD-NT670/CD-NT670D
Front view
CD-NT670/CD-NT670D
1 4 - 1
W a i t i n g . . .
CD-NT670/CD-NT670D
To AC outlet
Main menu selection
"INPUT" knob
Reverse
FL display
While pressing these keys, turn on the power.
To AC outlet
Power cable
Forward
Advertisement
Table of Contents
