Yamaha CDC-685 Owner's Manual page 23
Compact disc automatic changer
Hide thumbs
Also See for CDC-685:
- Owner's manual (32 pages) ,
- Service manual (50 pages) ,
- Product catalog (44 pages)
Table of Contents
Advertisement
When youfinishtheprogramming forsideA,
program thepause mode bypressing t heTAPE
button.
TAPE
*
"PAUSE"
lights
up in the display,
and after then you
can begin programming
for side B.
I_
Repeat
steps
5 and 6 to program
more tracks
for side B of the tape.
You can select the same track again.
*
If "ERROR"
appears
in the display,
the track number
just selected
cannot
be programmed
because
there is
no enough
time remaining
on side B of the tape.
[]
Start recording
on the tape deck and press the
_> button at the same time.
[]
The
unit will pause
at the end of side A of the
tape.Turn
the tape over to side B. Resume
recording
and, at the same time,
press the _> or
DDbutton.
• In steps 7 and 9, even if "ERROR" appears in the display, you
can program another track of which time is shorter than the
remaining time on the side of the tape. At this time, if any
other track number lighta up in the display, you can program
it.
• CD synchronized recording thncfion can be used if your tape
deck is compatible with it.
In this case, in steps 10 and l l, press the SYNCHRO button
mad then press the > button. Recording automatically begins.
(For details, refbr to page 16.)
Notes on tape programming
Ib check,
cancel or correct
program
data, refer to page
13.
The maximum
number
of tracks that can be programmed
is 40. if, however,
the PAUSE mode
is inserted,
it is
counted
as one track.
This function
can be used to program
up to track number
20. if the disc has more than 20 tracks, tracks
with track
number
21 and higher cannot
be programmed.
• Display information during pro-
gramming
i w
T
@ Shows the side of the tape and the program
number
for
the track to be programmed
next.
@ Shows the selected
disc and track number.
@ Shows the total remaining
time on the side of the tape.
@ Programmed
track numbers
light up and programmable
track numbers
among the unprogrammed
ones blink.
if "A-I"
does not appear
in the display
after the PROG
button is pressed,
press the TEXT/TIME
display
mode-
select button.
if, during
programming,
the TEXT/TIME
display
mode-
select button is pressed,
the program
number
display
can
be changed
to display
the total remaining
time on the
side of the tape.
To return to the previous
display,
press
the TEXT/TIME
display
mode-select
button once again.
|
E-19
Advertisement
Table of Contents
