Table of Contents
Advertisement
Configure Intelligent Analysis
Parameter
Allowed Parking
Time (Sec)
Output Channel
Audio Detect
Alarm
Alarm Record
SMTP
FTP Upload
Trace Linkage
Video Stream
Draw Line
Step 3 Set a deployment area
Move the cursor to the drawing interface and click to generate a point, move the cursor to draw a line,
and then click to generate another point. This is how a line is generated. In this way, continue to draw
lines to form any shape, and right-click to finish line drawing, as shown in Figure 7-14
Issue V1.0 (2023-02-10)
Description
An alarm is generated when the object left time is
longer than the shortest dwelling time. Setting range:
5-60 seconds.
If you check to set the Output Channel and the device
is connected to an external alarm indicator, the alarm
indicator signals when an alarm is triggered.
Enable to choose the sound alarm file from type
drop-down list. When it alarms the device will play
alarm sound file. Supplied for some models.
Enable the button to enable the alarm record.
Enable the button to enable SMTP sever. Details
please refer to chapter 10.5.
Enable the button to enable File Transfer Protocol.
Details please refer to chapter 10.6.
Enable the button to enable trace linkage, when the
relevant behaviors are detected, the camera will trace
the car or person until the object is disappear, then
the camera come back the original position. Supplied
for some models.
Enable the button, the draw line will show at live
video when the stream is stream 2.
Camera User Manual
Setting
[How to set]
Input a value in the
area box.
[Default value]
5
[How to set]
Click to select an
ID.
[How to set]
Click Enable to
enable.
[Default value]
OFF
[How to set]
Click to enable
Alarm Record.
[Default value]
OFF
[How to set]
Click to enable
SMTP.
[Default value]
OFF
[How to set]
Click to enable FTP
Upload.
[Default value]
OFF
[How to set]
Click to enable
Trace Linkage.
[Default value]
OFF
[How to set]
Click to enable
Video Stream Draw
Line.
[Default value]
OFF
90
Advertisement
Table of Contents
