Networking; System Settings; Settings For Sinumerik Solution Line - Siemens SINUMERIK 840D sl Equipment Manual
Handheld terminal
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
General information and networking
4.3 Networking
(1)
Figure 4-4
Unplugging the membrane connector
1. Loosen the dark clamping frame of the socket by pushing it up with your fingernails until it
engages in its upper, unlocked position (Fig. left).
2. Carefully pull off the membrane connector upward.
Plugging in the membrane connector
1. With the clamping frame in the upper position, carefully plug the membrane connector into
the socket.
2. Lock it in place by pushing down the clamping frame (Figure right).
4.3
Networking
4.3.1
System settings
4.3.1.1
Settings for SINUMERIK solution line
Range of validity
This description is valid for:
• NCU 7x0.3 PN with NCU-Basesoftware (Linux-based)
• PCU 50.5 with PCU-Basesoftware (Windows XP, Windows 7)
Introduction
This manual describes the structure and commissioning of the system network with SINUMERIK
solution line control and operator components with Ethernet-based communication. The
fundamentals of the system network are described first, details and special cases are described
in subsequent chapters.
36
Clamping frame of socket
Removing (left) and attaching (right) a membrane connector
(1)
Equipment Manual, 02/2024, A5E52918633B AA
Handheld Terminal HT 8
Advertisement
Table of Contents
