Table of Contents
Advertisement
PI
The currently selected pattern will be shown to the left ofthe
If you have just come from job 5, Save Pattern, this will be the
pattern you just saved. Use the numeric key pad to specify a card
memory pattern (00 to 99) to compare.
Compare with card pattern
Press +1/YES
to execute the compare
operation. If the two
patterns are the same, you will be returned to the CARD menu
display with a brief "Compare OK !" message. If not, you will get
one of the error messages listed at the end of this manual.
Job 7: LOAD PATTERN
Load Pattern lets you load a single pattern from card memory into
RX8.memory. Before entering this job, you must first select the
pattern in КХ8 memory to which you will copy the pattern from
card. Press PATTERN and select a pattern. Select Pattern). Then
press CARD/CAS, then JOB+7 to obtain the following display:
Currently selected RX8 pattern (destination)
Use the numeric key pad to choose a card pattern memory 00 to
99.
Card pattern memory
(source)
To load the selected pattern from card into RX8 memory, press
+1/YES. Then press the +1/YES key if you are sure you want to
make the copy.
Job 8: FORMAT
BANK
The RX8 stores four complete and independent sets of data in a
single Yamaha MCD32 memory card by dividing the card into
four banks. Before a memory card can be used to store RX8 data,
it must be formatted to accept RX8 data. Each bank must be
formatted separately. When a card bank is formatted, it is given
the same data as the initial setting of the RX8, ie formatting will
erase any previous data in that bank of the card. Before entering
this job, use job 1 to select the bank you wish to format. Then
press JOB + 8 to obtain the following display:
FORMAT
BANK
H
CARD.2>
12345678
Press +1/YES to format the selected bank of the card. You will
be asked to confirm the format operation, so press +1/YES to
38
format (this will erase any previous data in that bank of the card)
or press -1/NO to exit without formatting.
'
CN
ол h w N Jf
="
гч
== ч l
Advertisement
Table of Contents
