UNIT CONTROLLER
•
Configure circuit 1 and circuit 2 options: Disabled, Points, Gradient, Fix.
•
Only available for cooling mode.
•
Enable or disable Cascade Mode.
•
Configure Central mode options: Full, water, air or local. Only available when Cascade Mode is disabled.
•
Configure thermostat 1 or 2 (depending on previous settings): None, wired or wireless.
•
Check RT address if wired is selected.
•
Select Wireless binding ID (1 or 2) if wireless is selected.
•
Select Wizard complete and press OK button.
•
Select Yes to complete the advance configuration.
•
Press OK button to go to the main screen.
80
PMML0510 rev.1 - 10/2019