Table of Contents
Advertisement
FIELD
InhDeTst<W)
Graph Compa t
Configuring the Terminal
Table 3-3. Terminal Configuration Menu Fields (Continued)
FUNCTION
Enables or disables datacomm self test. Pressing the
DATACOMM TEST function key, or initiating an ((Ee
x",
when
the test is disabled, results in an error message.
Yes:
datacomm self test enabled.
No:
datacomm self test disabled.
Default=No
Selects or deselects Compatibility mode which allows the ter-
minal to respond to graphics control codes for Tektronix 4010
and 4014 terminals. (Refer to Appendix D for further informa-
tion.) Also, if Compatibility mode is selected, selects whether
the display will be a scaled down (Sea
I
ed) version of the 1024
X 780 point Tektronix display or a subset (Unsealed) of the
Tektronix display.
Of f :
Turns Compatibility mode off.
Uns ea
I
ed:
Displ~ys
a 512 by 390 point subset of the
Tektronix display, with 4010 capabilities only.
Scaled:
Unsealed
4014:
Scaled
4014:
Displays a scaled down (512 X 390) version of the
entire Tektronix display.
Displays a 512 by 390 point subset of the
4K by 3K address space of the Tektronix 4014,
with 4014 enhanced graphics capabilities.
Displays a scaled down (512 X 390) version of the
entire Tektronix display, with 4014 enhanced
graphics capabilities.
FldSeparator
Default=Off
When the. key is pressed, while the terminal is in Block
Page mode and the active window contains a formatted dis-
play, the terminal automatically transmits the specified field
separator character at the end of each unprotected field
(except the final one).
Value: Any ASCII character.
Default: <US> (Pt-to-pt)
<
R5
>
(Multipoint)
3-13
Advertisement
Table of Contents
