Call Forwarding-Busy/Off-Hook - Panasonic KX-T336 System Reference Manual
Hide thumbs
Also See for KX-T336:
- System reference manual (1605 pages) ,
- Installation instructions manual (872 pages) ,
- Manual (95 pages)
Table of Contents
Advertisement
2.02 Call Forwarding-Busy/Off-Hook
Description
Conditions
Call Forwarding-Busy/Off-Hook provides
automatic call transfer to a preset destination
when the user' s extension is busy.
Busy status means all PDNs are used, or off-hook
status (including hands-free status) or in the PITS
programming mode.
To set or cancel this function, use the PDN
button.
Incoming calls can be forwarded to extension
users, Voice Mail ports, or operators.
"FDN for General Operator Call' is used to assign
operators as the destination of Call Forwarding.
Refer to Section 9-D-l .Ol "Operation (l/3)' for
further information.
An extension user may have only one type of
Call Forwarding/Do Not Disturb feature in effect
at any time. If a second type is assigned, the
previously assigned type is canceled.
The following incoming calls do not receive Call
Forwarding treatment.
l
A call appearing on ICM button
l
A call from doorphone
l
A call appearing on PC0 button
l
A call routed via DK 1: N feature
l
A call directed to a UCD group
If the extension to which calls are to be
- ..
forwarded itself is in a call forward mode, a call is
not forwarded furthermore. The call rings at the
first forwarded extension. In case of an outside
call, if not answered in a specified time period,
the call will be routed to another destination, if
available, based on the "Intercept Routing-No
Answer feature.
To set this function, assign "System-Class of
Service", Call Forwarding/Do Not Disturb to ' Yes."
If Tenant Service is employed and ' Inter Tenant
Calling" is assigned to Yes' by programming,
this function is ineffective for the calls from
.another tenant if the destination of C&II
Forwarding-Busy/Off-t-look is set to an Attendant
Console.
Calls from any VM extension will' not be
forwarded, if forwarding destination is another
VM extension.
For setting and canceling this function, two
methods are available:
cl
> By pressing the FWD/DND button.
<2> By dialing the feature number for
"Call Fonnrarding-Busy Ser and
"Call Forwarding/Do Not Disturb Cancel."
Programming
Q-m prosrammins
Reterence
VT
Dumb
%ystem-Class of Service (l/2)' ,
9-D-4.01 lOG7.00
Call ForwardingKb Not
Disturb
"System-Numbering Pian (WY,
9-D-6.04 10420.00
Call Forwarding-Busy Set
' System-Numbering Plan (5/g)", 9-D-6.05 104-10.00
Call Forwarding/Do Not
Disturb Cancel
An extension user is rejected with reorder tone if
he or she attempts:
l
To set the destination to an extension in the
other tenant when Tenant Setice is employed.
l
To set the destination to another extension that
presets its own
destination to the user' s
extension.
l
To
call
another extension that presets its
destination to the user' s extension.
The Operators (Attendant Console or Extension)
can cancel the Call Forwarding/Do Not Disturb
feature assigned to the extension users. Refer to
Section
4-l-11
90 "Remote Station Feature
Control."
4-F-9
(21292)
Advertisement
Chapters
Table of Contents
