Table of Contents
Advertisement
Available languages
Available languages
16 | English
Always keep proper footing and operate the pruner
u
saw only when standing on fixed, secure and level sur-
face. Slippery or unstable surfaces may cause a loss of
balance or control of the pruner saw.
When cutting a branch that is under tension be alert
u
for spring back. When the tension in the wood fibres is
released the spring loaded branch may strike the oper-
ator and/or throw the pruner saw out of control.
Use extreme caution when cutting brush and saplings.
u
The slender material may catch the saw chain and be
whipped toward you or pull you off balance.
Carry the pruner saw by the rear handle with the pru-
u
ner saw switched off and away from your body. When
transporting or storing the pruner saw, always fit the
chain cover. Proper handling of the pruner saw will re-
duce the likelihood of accidental contact with the moving
saw chain.
Follow instructions for lubricating, chain tensioning
u
and changing the bar and chain. Improperly tensioned
or lubricated chain may either break or increase the
chance for kickback.
Cut wood only. Do not use pruner saw for purposes
u
not intended. For example: do not use pruner saw for
cutting metal, plastic, masonry or non-wood building
materials. Use of the pruner saw for operations different
than intended could result in a hazardous situation.
This pruner saw is not intended for tree felling. Use of
u
the pruner saw for operations different than intended
could result in serious injury to the operator or bystand-
ers.
Follow all instructions when clearing jammed mater-
u
ial, storing or servicing the pruner saw. Make sure the
switch is off and the battery pack is removed.
Causes and operator prevention of kickback:
u
– Kickback may occur when the nose or tip of the guide
bar touches an object, or when the wood closes in and
pinches the saw chain in the cut.
– Tip contact in some cases may cause a sudden reverse
reaction, kicking the guide bar up and back towards the
operator.
– Pinching the saw chain along the top of the guide bar
may push the guide bar rapidly back towards the oper-
ator.
– Either of these reactions may cause you to lose control
of the pruner saw which could result in serious personal
injury. Do not rely exclusively upon the safety devices
built into your saw. As a pruner saw user, you should take
several steps to keep your cutting jobs free from accident
or injury.
Kickback is the result of pruner saw misuse and/or incor-
rect operating procedures or conditions and can be
avoided by taking proper precautions as given below:
Maintain a firm grip, with thumbs and fingers encirc-
u
ling the pruner saw handles, with both hands on the
saw and position your body and arm to allow you to
resist kickback forces. Kickback forces can be con-
F 016 L94 333 | (23.05.2023)
trolled by the operator, if proper precautions are taken.
Do not let go of the pruner saw.
Do not overreach and do not cut above shoulder
u
height. This helps prevent unintended tip contact and en-
ables better control of the pruner saw in unexpected situ-
ations.
Only use replacement guide bars and saw chains spe-
u
cified by the manufacturer. Incorrect replacement
guide bars and saw chains may cause chain breakage
and/or kickback.
Follow the manufacturer's sharpening and mainten-
u
ance instructions for the saw chain. Decreasing the
depth gauge height can lead to increased kickback.
Additional safety warnings
This appliance is not intended for use by persons (in-
u
cluding children) with reduced physical, sensory or
mental capabilities, or lack of experience and know-
ledge, unless they have been given supervision or in-
struction concerning use of the appliance by a person
responsible for their safety. Children should be super-
vised to ensure that they do not play with the appliance.
Always ensure all handles and guards are fitted when
u
using the machine. Never attempt to use an incomplete
machine or one fitted with an unauthorized modification.
Always make sure that the chain is in the correct position.
u
An incorrectly positioned chain can result in chain break-
age, kickback and/or injury.
Always Wear robust full length trousers, when operating
u
the pruner saw.
This pruner saw is not suitable for cuts that are made
u
from the bottom up. Use of the pruner saw for opera-
tions different than intended could result in a hazardous
situation.
Safety Instructions and Recommendations for
Optimal Handling of the Battery
Ensure the product is switched off before inserting
u
the battery. Inserting the battery into a product that has
the switch on can cause accidents.
Use only Bosch batteries intended specifically for this
u
product. Use of any other batteries may create a risk of
injury and fire.
Do not open the battery. There is a risk of short-circuit-
u
ing.
Protect the battery against heat (e.g.,
against continuous intense sunlight), fire,
water, and moisture. There is a risk of explo-
sion.
When not using the machine, keep the battery not in
u
use away from paper clips, coins, keys, nails, screws,
or other small metal objects that could cause bridging
of the terminals. Shorting the battery terminals together
may cause burns or a fire.
In case of damage and improper use of the battery
u
pack, vapours may be emitted. Ventilate the area and
Bosch Power Tools
Advertisement
Table of Contents
