Power Supply Cord
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use a new 40 amp power supply cord.
Plug into a grounded outlet.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Disconnect power.
2. Use Phillips screwdriver to remove the terminal block cover
screw located on the back of the range. Pull cover down and
toward you to remove cover.
3. Remove plastic tag holding three 10-32 hex nuts from the
middle post of the terminal block.
4. Add strain relief.
Style 1: Power supply cord strain relief
■
Assemble a UL listed strain relief in the opening.
A. UL listed strain relief
6
Electrical Connection
A
Direct Wire
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge copper or 6 gauge aluminum wire.
Electrically ground range.
Failure to follow these instructions can result in death,
fire, or electrical shock.
■
Feed the power supply cord through the opening in the
cord/conduit plate on bottom of range. Allow enough
slack to easily attach the wiring to the terminal block.
■
Tighten strain relief screw against the power supply cord.
Style 2: Direct wire strain relief
■
Use Phillips screwdriver to remove screws from panel on
back of range.
USE
USE
REMOVE
REMOVE
POWER
POWER
TAG!
TAG!
POWER
CORD
CORD
A
S
CORD
A
NUTS
QUITE
QUITE
NUTS
NUTS
LA
LAS
WITH
WITH
LA
WITH
ETIQUET
ETIQUET
TUERCA
AR
ICO
AR
EL
EL
ICO
USE
PARA
CORDÓN
CORDÓN
PARA
CONECT
CONECT
ELÉCTR
ELÉCTR