Table of Contents
Advertisement
HOOKUP CABLES
Most video/audio connections
between components
can be made with shielded video and audio cables that have phono connectors,
For best performance,
video cables should use 75-Ohm coaxial shielded wire, Cables can be purchased from most stores that sell
audio/video products, Below are illustrations and names of common connectors,
Before purchasing any cables, be sure of the output
and input connector types required by the various components
and the length of each cable,
300-Ohm Twin Lead Connector
"_
This outdoor antenna cable must be connected
to an
antenna adapter (300-Ohm to 75-Ohm).
Phono Connector
Used on all standard
video and audio cables which
connect to inputs and outputs located on the rear jack
panel and front control panel,
STEREO
RCA TYPE
M_N_.PLUG
PLUGS
Stereo Cable (3.5 mm plug to 3.5 mm plug)
This cable is used to connect from external audio out to
the audio input of the AVC Center (ex, RGB Input),
..-J1
•
d
IR Mouse Cable (Provided)
Connect the IR Mouse to the ]R output on your AVC
center when A/V Network is used, You must place the
IR mouse in front of the corresponding IR window of
your cable box and VCR,
This connection allows your
TV to control your cable box and VCR,
Subwoofer Cable (Provided)
This cable
is used to connect an external
audio
component input to the subwoofer output of the Display
Monitor.
"F" Type 75-Ohm Coaxial Antenna Connector
For connecting RF signals (antenna or cable TV) to the
antenna jack on the television.
S-Video (Super Video) Connector
This connector is used on camcorders
VCRs and laser-
disc players with an S-Video feature in place of the
standard video cable to produce a high quality picture.
D-SUB MINI 15-Pin Cable
This cable is used to connect a computer output to the
D-SUB input located on the rear panel of the AVC
Center, The resolution should be set correctly to display
the signal on the Plasma Television,
Monitor Connection Cable (Provided)
This cable is used to connect the Display Monitor to the
AVC Center.
ANTENNA CONNECTIONS
TO REAR JACK PANEL
VHF (75-Ohm) antenna/CATV (Cable TV)
When using a 75-Ohm coaxial cable system, connect the outdoor antenna or CATV
coaxial cable to the ANT A (75-Ohm) terminal. If you have a second antenna or cable TV
system, connect the coaxial cable to the ANT B terminal.
To second antenna
or cable system
To outdo0,
antenn_
or CATV cable
VHF (300-Ohm) antenna/UHF
antenna
When using a 300-Ohm twin lead from an outdoor antenna, connect the VHF or UHF
antenna leads to screws of the VHF or UHF adapter,
Plug the adapter into the antenna
terminal on the TV,
When both VHF and UHF antennas are connected
Attach an optional antenna cable mixer to the TV antenna terminal, and connect the
cables to the antenna
mixer. Consult
your dealer or service store for the antenna
mixer.
ANT A/ANT B
TO UHF
To outdoor antenna
antenna
or CATV system
1"
Antenna
Mixer
8
Advertisement
Table of Contents
