Yamaha QX5 Owner's Manual page 16
Digital sequence recorder
Hide thumbs
Also See for QX5:
- Eigentümer-handbuch (63 pages) ,
- Owner's manual (63 pages) ,
- Owner's manual (62 pages)
Table of Contents
Advertisement
RECORDING
All recording is done on track 1. In order to record, track 1 must be on (p. 13) and Memory Protect must be off
(p. 39). When you press [RECORD], the Record LED will light, the display will show the currently selected Record
Mode
(Realtime, Punch
In, Step), and the measure counter will move to the beginning of the current measure.
When the Record LED is lit, you will not be able to enter other modes. Press
again to exit record mode.
RECORD
SHIFT
REC MODE
REALTIME
250
PUNCH
IN
250
STEP
250
T=120
M=0001-01
T=120
M=0001-01
1/04
080%
064
Realtime recording is where the QX5 records your performance just as you play
REALTIME
it. The number in the upper right indicates the size of free memory in blocks of about
RECORDING
80 notes (without velocity). In Record mode, holding down
will speed the
tempo up x4, and
will decrease and increase tempo just as in Tempo
mode. Tempo memories (p. 12) can be recalled, but not saved.
Free memory
Tempo x 4
Slower
Faster
REALTIME
250
uza
d
Fa
T=120
M=0001-01
CJJI
JOB
CURSOR
<a
>
Tempo
Position
Countdown
To record from the beginning, press
[START]. To record from the current measure,
press [CONTINUE]. If Clock=Internal, you will get a 2-measure countdown (me- ~
tronome and display) before recording begins. You can send a Program Change
message during the countdown,
and it will automatically be recorded at the top
of the measure
you begin recording
on.
If Clock=MIDI
or Tape, there is no
countdown. Also, if you have set Click to Manual (see p. 38) and turned it off, there
will be no countdown.
Ready to record
Press Start
Countdown begins
Recording begins
RECORD
START
=
REALTIME
250
=
REALTIME
249
T=120
COUNT=08
T=120
M=0001~01
REC
MODE
ENTER
15
Advertisement
Table of Contents
