Bosch AXT Rapid 2000 Original Instructions Manual page 13

Blade shredder
Hide thumbs Also See for AXT Rapid 2000:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 11
immediately switch off and allow the cutter to stop. Remove
the plug from the mains supply and take the following steps:
– Inspect for damage.
– Replace or repair any damaged parts.
– Check for and tighten any loose parts.
Do not attempt to repair the machine unless you are quali-
u
fied to do so.
Do not allow processed material to build up in the dis-
u
charge zone; this may prevent proper discharge which
can result in kickback of material through the chute as-
sembly.
If the machine becomes clogged, switch off and allow the
u
cutter to stop. Remove the plug from the mains supply be-
fore clearing debris.
Check that covers and guards are undamaged and cor-
u
rectly fitted. Carry out necessary maintenance or repairs
before using.
Do not tamper with the motor speed. Contact a Bosch ap-
u
proved service agent if a problem exists.
Keep the motor cooling vents clean of debris and other
u
accumulations to prevent damage to the motor or pos-
sible fire.
Never pick up or carry the machine while the motor is run-
u
ning.
Switch off, allow the cutter to stop and remove the plug
u
from the mains supply whenever you leave the work area.
Do not tilt the machine while it is running.
u
Do not expose the machine to rain. Only store the ma-
u
chine in a dry place.
When using an aggregator then it needs to be an Auto-
u
matic Voltage Regulation (AVR) version avoiding damages
caused by overvoltage spikes.
Maintenance and Storage
When the machine is stopped for servicing, inspection, or
u
storage, or to change an accessory, switch off and re-
move the plug from the mains supply and allow the ma-
chine to cool. Make sure that all moving parts have come
to a complete stop before making any inspections, adjust-
ments, etc.
Maintain the machine with care and keep it clean.
u
Examine the machine and replace worn or damaged parts
u
for safety.
Ensure replacement parts fitted are Bosch-approved.
u
If an extension cord is used it shall not be of lighter grade
u
than the supply cord already fitted to the machine.
Check the supply cord and any extension cord regularly
u
for damage or signs of ageing. Do not use the machine, if
the cords are damaged.
When servicing the cutter be aware that, even though the
u
motor will not start due to the interlock feature of the
guard, the cutter can still be moved if the motor is turned
by hand.
Never attempt to override the interlock feature of the
u
hopper.
Bosch Power Tools
Symbols
The following symbols are important for reading and under-
standing the original instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the product in a better and safer
manner.
Symbol
Meaning
Movement direction
Reaction direction
Switching on
Switching off
Accessories/Spare Parts
Product Description and
Specifications
Read all safety warnings and all instructions.
Failure to follow the safety warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the ending of this operat-
ing manual.
Intended Use
The machine is intended for shredding leafy, green garden
waste, such as hedge cuttings. It is not suitable for heavy-
duty use or for use other than intended.
Delivery scope (see figure B)
Carefully remove the machine from its packaging and check
if the following parts are complete:
– Shredder
– Prodder
a)
– Collection bag
– Wheels
– Axle of wheels
– Frame
– Assembly Kit
– Hex Key
– Operating instructions
When parts are missing or damaged, please contact your
dealer.
When fully assembled, the garden product weighs approxim-
ately 11.9 – 12.1 kg. If necessary, obtain assistance to re-
move from packaging.
English | 13
F 016 L94 416 | (10.10.2023)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Axt rapid 2200

Table of Contents