Necessary Setup Before Using The Player; Selecting The Language For On-Screen Display - Sony DVP-S300 Operating Instructions Manual
Hide thumbs
Also See for DVP-S300:
- Training manual (108 pages) ,
- Operating instructions manual (96 pages) ,
- Service manual (75 pages)
Table of Contents
Advertisement
Necessary Setup Before Using
the Player
Some setups are necessary for the player depending
on
the TV or other components
to be connected.
For details on using the setup display, see page 32.
For details on each setup display item, see pages 33 to
35.
==To connect the player to a wide-screen
TV
In the setup display, set "TV TYPE" in "INITIAL
SETUP
1" to _'16:9."
IITo connect the player to a normal TV
In the setup display, set "TV TYPE" in "INITIAL
SETUP
1" to "4:3 LETTER BOX" (default
setting) or %:3 PAN
SCAN."
For details, see page 34.
==To listen to the sound through speakers connected to
an amplifier with a digital connector or to output the
sound to a digital component such as a DAT or MD deck
When you play a DVD, set "DIGITAL
OUT" in "INITIAL
SETUP 2" to "PCM"
in the setup display.
This is default
setting.
IITo connect the player to a digital component with a
built-in Dolby Digital decoder
In the setup display,
set "DIGITAL OUT" in "INITIAL
SETUP 2" to "DOLBY DIGITAL/PCM."
Use the setup display to change the various
settings for
the picture and sound.
For details, see page 32.
Selecting the Language for.
On-screen Display
You can select the language for the setup display or the
messages displayed
on the screen. Default setting is
"ENGLISH."
SET UP
ENTER
Press SET UP and select
"l_"
using 41_/,,,#, and
then press ENTER.
LANGUAGE
SETUP
2
Select "OSD" using 4'/_',
then press _
or ENTER.
LANGUAGE
SETUP
3
Select the language you want using _ / _, then
press ENTER.
CHOIX
LANGUE
D'AFFICHAGE
To cancel usingthe setup display on the way
Press SETUP.
Note
The languages
you can select are the ones displayed
in step 2.
For details, see page 33.
Advertisement
Table of Contents
