Table of Contents
Advertisement
Function of
electronic control
Starting
Before switching it on, leave the appliance standing for
at least 2 hours, so that the circulation of the refrigerant
stabilizes and no operating problems occur.
When the appliance powers on, the initial state displayed
on LED is "-18°C".
•
Button K1 (Defrost):
Press button K1 for three seconds the first time, indicator
"-", "°C", "h" shut off, compressor stop running and the
value displayed on LED is"OF". Press button K1 for the
second time , indicator "-", "°C", "h" display normally,
compressor running normally and LED displays the initial
state.
• Button K2 (Quick freezing):
Press butoon K2 for the first time, indicator "-", "°C"shut
off, indicator "h" light on and initial freezing time displayed
is"3h". Press button K2 for the second time the freezing
time displayed is "2h". Press button K2 for the third time
the freezing time displayed is "1h". The compressor will ren
from 1hour to 3 hours according to the freezing time
displayed on LED. Press button K2 for the fourth time, the
indicators will recover the state before quick freeze.
• Button K3 (Temperature regulation):
Press button K3 continuously, the provided temperature
displayed will be from -14°C to -27°C circularly.
9
Operation
° C
h
Advertisement
Table of Contents
