Table of Contents
Advertisement
System
Item
Language
Firmware Update
Factory Default
Camera Reboot
Change Password
SSL Certificate
Date Format
Time Format
Time Correction Mode
Allow Providing of Anonymous
Description
Select a language for the web interface.
Update your camera's firmware.
Auto Update: Checks and updates online.
Manual Update: Update the firmware using a file offline.
Note: The camera will reboot and the connection will be lost. Please
wait a few minutes and keep the power cable connected.
Unplugging the cable during this process may damage the device.
Reset your camera to factory default settings. You can choose to
keep the IP address by selecting the checkmark.
If you forgot your password, use PTZApp 2 to reset the web
interface password to the default aver4321.
Reboot the camera.
Change the web interface password.
Use 6-10 characters, upper and lowercase letters, numbers and
special characters (* ! % + = , - _ ^ / @ . ~).
If you forgot your password, use PTZApp 2 to reset the web
interface password to the default aver4321.
Upload an SSL certificate.
Select a date format.
Select a time format.
Select a time correction mode.
Auto: Enter your Network Time Protocol (NTP) server URL to
synchronize the clock. The default NTP server is located in the
US.
Manual: Click the pencil icon to set up the clock.
Opt-in or opt-out of providing usage data.
38
Advertisement
Table of Contents
