Table of Contents
Advertisement
Installation
for
use
with
the
37210T modem.
The Racal Vadic VA1601U Stand
Alone chassis is recommended.
The Tellco needs to supply
either
a
RJ45S
Data Jack (for operation without a handset), or a RJ47S
data jack (for operation with a handset).
An RJ-47S data jack is
a RJ45S data jack attached to an RTS phone
via
an
RJ-36X
con-
necting
cable.
The handset can only be used if the INP is con-
figured for manual dialing.
The modem should connect to the ACU via the RJ45S cable (HP 8120-
2972) supplied with option 3.
This connection should be made
at
the
post
connectors
of
option
3
of
the modem, and the plug
labeled
MODEM
(J2) on the ACU.
The ACU
connects
to
the
phone
line
via
a RJ45S plug (supplied with the ACU).
This connection
is made at the plug labeled
MODEM
(J2) on the ACU.
The modem and
ACU connect to the INP via the HP 30221G cable.
The cable should
be plugged into the modem and ACU as indicated by the molded
labels
on the connectors.
P1
1147035·17
VA811
DIALER
37210T
MODEM
J4
J2
P3
J5
SUPPLIED
WITH DIALER
l
TO TELCO LINE
+
HP 30221G
....,_~-----
....... TO INP
HP 8120-2972
SUPPLIED
WITH MODEM
VA811005
Figure 2-6.
HP 37210T modem to auto call unit connection
2-13
Advertisement
Table of Contents
Troubleshooting
