Table of Contents
Advertisement
7.
WAN
7.1 WAN Status
This tab provides information
about WAN connectivity status
and the following key information:
• Time duration
(format HH:MM:SS)
• MAC address
• Connection Mode: DHCP,
Static IP, PPPoE, etc.
• IP address
• Subnet mask
• Default gateway
• Primary & Secondary DNS server
7.2 WAN Setting:
On this page, you can set up
Ethernet WAN connection
mode to DHCP, Static IP,
PPPoE or switch WAN port
to LAN, depending on your
connection usage. Click on
down arrow to reveal the
drop-down the menu to select
your preferred WAN settings.
You can select "Switch WAN port to LAN (Switch/Bridge mode)", if you are using
the router in bridge mode in which the port is not required. As a result, you can
have one more LAN port.
Note: After switching to Bridge mode,
1) Please disable the DHCP Server on the Predator Connect W6 according to
your network topology.
2) Some functions may not work as how it does in router mode. E.g. Home
network security, Hybrid QoS, Guest Wi-Fi, Smart Home Wi-Fi, IPv6, DMZ,
Firewall, NAT pass-through, Port forwarding, VPN, WAN ping, WAN setting.
3) To access Predator Connect W6's web portal, it is recommended to set up IP
under your client network device and connect to W6 via Ethernet cable. The
LAN gateway of W6 should also be configured as the client network device's
gateway and DNS server.
19 19
Advertisement
Table of Contents
