Table of Contents
Advertisement
System Monitoring
file name ENDL INE
If a conversion is requested, the program prompts for the
name of the file containing the subprogram.
Enter the name of the file and press ENDLINE | .
When the specifications for the digital functions have been entered, proceed to subsection 7.5, "Limits."
7.4.3 Custom Program
A custom program may be called which takes a reading from another instrument, or uses a custom
sequence with the HP 3421A.
The program must return a value for display purposes.
Note that no
conversion subprogram calls are available for custom program calls. Refer to appendix C, "Custom
Programs", for further details about custom programs.
file name ENDL INE
moale minimam
scale minimum ENDLINE
male maximum
scale maximum ENDLINE
The program prompts for the subprogram name.
Enter the name of the subprogram and press ENDLINE | .
The
program
prompts
for
the
file
containing
the
subprogram.
Enter the file name and press ENDLINE J .
The program prompts for the scaling values for the
pictorial representation in the video display.
Enter the value which represents the lower bound of the
nominal operating range for this trace.
Enter the value which represents the upper bound of the
nominal operating range for this trace.
When the name of the custom program and the scaling information have been entered, proceed to
subsection 7.5, "Limits."
7-10
Advertisement
Table of Contents
