Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
1. SAFETY
WARNING! Read operation instructions before use.
‰
DO NOT leave the unit unattended while in operation.
8
Check capacity and maximum inflation pressure of inflatable before commencing inflation.
9
Monitor the pressure gauge while in operation.
9
The gauge should be used as an indication of pressure only. We recommend the use of a dial pressure gauge for definitive reading.
9
WARNING! This compressor is capable of producing a high pressure.
‰
DO NOT inflate any item beyond its maximum capacity.
8
DO NOT direct inflation hose connector head at yourself, others or animals.
8
DO NOT carry by the hose, or yank the hose from an inflation valve.
8
DO NOT get the compressor wet or use in the rain.
8
DO NOT use the compressor for a task it was not designed to perform.
8
DO NOT operate the compressor if any parts are missing as this may cause failure or possible personal injury.
8
DO NOT open the unit.
8
Keep children and non essential persons away from the inflation area.
9
Keep the compressor clean and in good condition.
9
Avoid bending the hose during inflation.
9
Turn off the pump immediately if overheating or any abnormality is observed during operation.
9
If no preset pressure value, DO NOT leave the pump unattended during inflation to prevent the air pressure getting too high.
9
Keep the pump away from any flammable or combustible objects during operation, since the built-in DC motor may generate sparks
9
during operation.
Keep the pump away from moisture, sand and shock.
9
DO NOT store the pump in extremely cold or hot places. That will shorten product life, damage battery, or deform the structural.
8
Avoid using strong chemicals or detergents to clean the product.
9
DO NOT disassemble the product. DO NOT throw the product into fire or household waste.
8
DO NOT let children use the product.
8
DO NOT insert the hose into mouth, ears,or eyes of humans or animals. It must not be used as a toy.
8
This compressor is not designed for continuous use. Operation over an extended period of time will overheat the unit and damage
9
the compressor. It should not be used continuously for more than 30 minutes. After 30 minutes, turn it off and let it cool for 15
minutes before resuming operation.
2. INTRODUCTION
Handheld cordless tyre inflator. Digital LED display. Pressure can be set in either psi or bar. Automatic cut-out when pre-selected
pressure has been reached. Double injection composite body with rubber grips for added comfort and vibration reduction. Supplied
with 500mm compressor hose with tyre valve, ball needle, bike tyre valves (x2) and universal adaptors (x3). Requires compatible
20V battery and mains charger, sold separately.
3. SPECIFICATION
Model No: .................................................. CP20VAP.V2
Battery ............ 20V 2Ah - 6Ah Lithium-ion (not included)
Consumable parts:
CP20VBP2 - 2Ah Battery, CP20VBP4 - 4Ah Battery,
CP20VBP6 - 6Ah Battery
Max air pressure .......................................... 7bar/100psi
Replacement parts:
CP20VMC - Mains Charger (not included)
Typical inflation time ........... 0-30psi in 205sec (175/70R)
© Jack Sealey Limited
20V SV20 SERIES CORDLESS TYRE
INFLATOR - BODY ONLY
CP20VAP.V2
MODEL NO:
Original Language Version
fig.1
Trigger
Work piece LED
CP20VAP.V2 Issue 1 01/03/23
Advertisement
Related Manuals for Sealey CP20VAP.V2
Summary of Contents for Sealey CP20VAP.V2
- Page 1 CP20VAP.V2 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information. Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our technical team on technical@sealey.co.uk or 01284 757505. Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 sales@sealey.co.uk www.sealey.co.uk Original Language Version CP20VAP.V2 Issue 1 01/03/23 © Jack Sealey Limited...